ASC SYSTEM


  1. FUNCTION OF MAIN COMPONENTS

    Item Function
    Stereo Component Equalizer Assembly

    • The stereo component equalizer assembly calculates the frequency of the output sound based on the vehicle speed, accelerator pedal depression angle, calculated engine rotation speed, generated torque, shift lever position, shift range and driving mode signals.

    • The stereo component equalizer assembly creates synthesized sounds which are output to the No. 1 speaker with box assembly through the power amplifier.
    No. 1 Speaker with Box Assembly Emits sounds based on the signal from the stereo component equalizer assembly. The No. 1 speaker output sound is reverberated in the box.
    ECM Sends the accelerator pedal depression angle, calculated engine rotation speed, generated torque, shift lever position, shift range and driving mode signals to the stereo component equalizer assembly.
    Acceleration Pedal Sensor Assembly Sends the accelerator pedal depression angle signal to the power management control ECU.
    Combination Switch Assembly Sends a drive mode selected signal to the power management control ECU.
    Skid Control ECU Assembly Detects the signals from each speed sensor and outputs the vehicle speed signal to the power management control ECU.
    Front RH Speed Sensor Detects the wheel speed of each of the 4 wheels.
    Front LH Speed Sensor
    Rear RH Speed Sensor
    Rear LH Speed Sensor

  2. OPERATING CONDITION


    1. The ASC system uses the stereo component equalizer assembly to generate dynamic engine sounds electronically. These sounds are output from the No. 1 speaker assembly with box. The dynamic engine sounds are calculated in accordance with vehicle information, such as the drive mode, vehicle speed, shift lever position and accelerator pedal opening angle. By operating the vehicle sound switch, the sounds can be turned on/off and volume can be adjusted.

    2. The following sounds are generated.

      Sound Description
      Additional Engine Sounds

      • Specially designed engine sounds which are synchronized with the engine speed and output when the vehicle is being driven.

      • Generated when the vehicle speed is 6 km/h (4 mph) or more and engine speed is 980 rpm or more.

      1. Additional engine sounds generation conditions

        Item Condition Remark
        Drive mode NORMAL or SPORT mode In NORMAL mode, only some of the additional engine sounds will be generated
        Shift lever position P, R, N, D, M -
        Vehicle speed 6 km/h (4 mph) or more When all of the conditions are met, additional engine sounds are generated.
        Engine speed 980 rpm or more
        B0072D7C01
        *a Example of additional engine sounds generation *b Vehicle speed
        *c Time *d Accelerating
        *e Decelerating *f When vehicle being driven
        *g 6 km/h (4 mph) *h 980 rpm or more
        *i Less than 980 rpm *j Sounds output

  3. DIAGNOSIS


    1. If the stereo component equalizer assembly detects a malfunction in the grille shutter system, Diagnostic Trouble Codes (DTCs) are stored in the stereo component equalizer assembly.


      1. The 5-digit DTCs can be read by connecting the TechStream to the DLC3. For details, refer to the Repair Manual.