BRAKE SYSTEM


  1. OUTLINE


    1. A plunger type brake master cylinder sub-assembly is used.

    2. A single type brake booster assembly is used.

    3. A vacuum warning switch assembly*1 or vacuum sensor assembly*2, which detects negative pressure, is provided.

      *1: Models without stop and start system

      *2: Models with stop and start system

  2. SPECIFICATION

    Brake Master Cylinder Sub-assembly Type Tandem (Plunger)
    Diameter mm (in.) 22.22 (0.875)
    Brake Booster Assembly Type Single
    Size mm (in.) 255 (10.0)