AUTOMATIC TRANSMISSION SYSTEM


  1. CONSTRUCTION


    1. The park/neutral position switch assembly sends the P, R, N, D and NSW signals to the ECM.

    2. The transmission control switch is installed inside the transmission floor shift assembly to detect the M mode position and to inform the ECM.

    3. The transmission control switch detects whether the shift lever is in D or M, and detects the operating conditions of the shift lever "+" (forward) or "-" (backward) when the shift lever is in M, and sends signals to the ECM.

    4. The shift paddle switch (transmission shift switch assembly) is installed in the steering wheel. The ECM detects the operation of the shift paddle switch (transmission shift switch assembly) "+" (upshift) or "-" (downshift) when the shift lever is in D or M.

      A01OGENE01