SEAT ASSEMBLY


  1. CONSTRUCTION


    1. A 60/40 split folding rear seat is provided.

    2. Cup holders integrated into the armrest are provided.

    3. Saddle-shaped headrests are provided.

    4. For models without rear power seats, a reclining lever is provided on the seat cushion sides.

      A01H2EJC02
      *1 Rear Seat Center Armrest Cup Holder *2 Rear Reclining Lever

    5. For models without rear power seats, dampers are provided for the reclining mechanism.

      A01H2G9C02
      *1 Damper - -
      *a Provided for Left and Right Rear Outside Seats - -

    6. ISO-FIX bars for securing child seats are provided behind the seat cushion of the rear seat.

    7. Top tether anchor bars are provided for the rear seats. In addition, covers (child restraint seat tether anchor covers) are provided for the top tether anchor bars (child restraint seat tether anchor bracket) in consideration of appearance.

      A01H2QSC02
      *1 ISO-FIX Bar (Child Restraint Seat Anchor Bracket Sub-assembly) *2 Top Tether Anchor Bar
      *3 Cover (Child Restraint Seat Tether Anchor Cover) - -