NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM


  1. FUNCTION OF MAIN COMPONENTS

    Component Function
    Multi-display Assembly Displays image information received from the radio receiver assembly.
    Radio Receiver Assembly

    • Plays back audio from each audio source, such as radio, CD/DVD and Bluetooth audio.

    • Sends image information such as the audio source screen and setting screen to the multi-display assembly.

    • Sends audio signals from each audio source to the stereo component amplifier assembly.

    • Sends status information of each audio source to the combination meter assembly.
    Remote Touch (Remote Operation Controller Assembly)

    • Sends operation signals to the radio receiver assembly.

    • Generates vibration to the touch pad based on signals from the radio receiver assembly.
    Navigation Antenna Assembly Receives signals from the GPS satellites and transmits them to the radio receiver assembly.

    Rear Spoiler Sub-assembly


    • AM

    • FM-main

    • Amplifier Antenna Assembly

    		 Receives radio broadcasting signals (AM/FM-main).

    Window Glass Antenna Wire (Rear)


    • FM-sub

    		 Receives radio broadcasting signals (FM-sub).
    No. 2 Amplifier Antenna Assembly Amplifies radio broadcasting signals from the radio antenna and sends them to the radio receiver assembly.

    Window Glass Antenna Wire (Front)


    • DAB*1

    		 Receives radio broadcasting signals (DAB).
    No. 1 Amplifier Antenna Assembly*1 Amplifies DAB signals from the DAB antenna and sends them to the radio receiver assembly.
    Steering Pad Switch Assembly Sends operation signals, such as volume switch, mode switch, seek switch operation, to the spiral cable with sensor sub-assembly.
    Spiral Cable with Sensor Sub-assembly Sends operation signals from the steering pad switch assembly to the radio receiver assembly.
    No. 1 Stereo Jack Adapter Assembly

    • Sends audio and/or video signals to the radio receiver assembly when an auxiliary device is connected.

    • Communicates with the radio receiver assembly via a USB communication line when a USB memory device, portable audio player (USB type) or Apple product is connected.

    Map Light Assembly


    • Telephone Microphone Assembly

    		 Recognizes speech during a hands-free call or voice recognition system operation and sends the audio signal to the radio receiver assembly or telematics transceiver (data communication module).
    Combination Meter Assembly

    • Sends vehicle speed signals to the radio receiver assembly, stereo component amplifier assembly and DCM (telematics transceiver).

    • Displays information such as audio status information received from the radio receiver assembly on the multi-information display.

    • Sends operation signals to the radio receiver assembly when the audio system is operated via the multi-information display.
    Parking Brake ECU Assembly Transmits parking brake on signals to the radio receiver assembly.
    Stereo Component Amplifier Assembly Amplifies audio signals sent from the radio receiver assembly and sends them to the speakers.
    Telematics Transceiver (Data Communication Module)*2

    • Sends a part of audio signals sent from the radio receiver assembly to the speakers.

    • Sends microphone voice signals sent from the telephone microphone assembly to the radio receiver assembly.

    • *1: Models with digital broadcast (DAB) tuner

    • *2: Models with telematics transceiver connection type telematics system

  2. FUNCTION


    1. Navigation Screen


      1. The navigation computer calculates the present position and direction of travel, determines a route and calculates the driving distance based on the following information sources:


        • Map data in the microSD card

        • Global Positioning System (GPS) satellites

        • Built-in gyro sensor

        • Vehicle speed signal

        • Reverse signal

        • Parking brake signal

        • Radio Data System Traffic Message Channel (RDS-TMC) and Transport Protocol Experts Group (TPEG) signals*1

        • Radio Data System Traffic Message Channel (RDS-TMC) signal*2

        • Real-time Traffic Information of China (RTIC) signal*3

        • Telematics Data (G-BOOK) signal*3


          • *1: Models for Europe

          • *2: Except models for Europe and China

          • *3: Models for China

        Item Function
        Map Display Taillight-interlocked Map Color Change Changes the color of the map screen that is displayed when the taillights are turned on.
        North Up/Heading Up

        • If North Up is selected, north is always at the top of the map.

        • If Heading Up is selected, the direction the vehicle is traveling is at the top of the map.
        3D Display*1, *2, *3, *4, *5, *7 Displays a 3-dimensional (3D) view of the map.
        3D City Model Map*1, *2, *4, *5, *7, *8

        • Displays some areas of major cities with a 3-dimensional (3D) city model map when the map scale is set to 100 m or less.

        • Always displayed in Heading Up mode.
        Multi-step Scale Display Changes the map scale in 14 steps.*1, *3, *4, *5, *6
        Changes the map scale in 13 steps.*2, *7, *8
        Direct Scale Change Directly selects and displays the map scale.
        Street Name Indication on Scrolled Map Displays the street name and city name even when the map screen is being scrolled.
        Footprint Map Displays a major city in a scale of 25 m.*6
        Stepless Scale Display Changes the scale of the map from the basic 14 steps to an even finer range of scales.*1, *3, *4, *5, *6
        Changes the scale of the map from the basic 13 steps to an even finer range of scales.*2, *7, *8
        Road Number Sign Board Displays the road number on the map.
        Point Of Interest (POI) Display Displays selected types of points of interest as marks on the map.
        Multiple Display Function Displays different modes on a screen that is split into 2 or 3 views.
        Compass Mode Screen*1, *2, *3, *4, *5, *6, *7 Displays the direction of travel and detailed data of the present location.
        Route Guidance Demonstration Demonstrates the route guidance to the destination.
        Route Trace*6

        • It is possible to store up to the last 1000 km of a traveled route and retrace the route on the display.

        • Available when the map scale is set to 50 km or less.
        Route Trace Registration*1, *3, *4, *5, *8

        • A traveled route (up to 124 miles (200 km)) can be stored with a name by setting a start point and end point.

        • The stored traveled route can be displayed on the map screen.

        • Available when the map scale is set to 30 miles (50 km) or less.
        RDS-TMC and TPEG Service Information Display*1 Displays the traffic icons, arrows and indicators when RDS-TMC or TPEG service information is being received.
        RDS-TMC Display*2, *4, *5, *6, *8 Displays RDS-TMC icons, arrows, popup messages and indicators when RDS-TMC service is being received.
        Destination Search Preset Destination Memory Search A destination can be set from a pre-registered point while driving.
        Name Search*2, *8 The name of a destination can be entered with the screen keyboard and searched for. Then a destination is selected using the area or POI category.
        Address Search Destination information can be entered in the following order: area, town name, street name and house number.*1, *3, *4, *5

        A destination can be set in 2 ways:*6


        • Destination information can be entered in the following order: house number, street name and city name.

        • Destination information can be entered in the following order: city name, street name and house number.
        Destination information can be entered in the following order: province, town name, street name and block number.*8
        Address/Intersection Search*2 Destination information can be entered in the following order: province, city name, street name, house number and intersection.
        Point Of Interest (POI) Search Searches for a point of interest by selecting the area from the category.*2, *8

        A destination can be set in 3 ways:*6


        • The name of a POI can be entered and then searched for from City or Category or on the web search using the LEXUS ENFORM apps.*9

        • A POI category can be selected and a point of interest searched for near the present location, along the current route, near the city center or near the destination.

        • The phone number of a point of interest can be entered to search for it.
        Hybrid Point Of Interest (POI)*1, *3, *4, *5 Narrows the search by names of the point of interest, category and areas.
        Online Search*1 Allows use of an internet search engine to set a destination using the most up to date information.
        Online Database Destination Search*6 A point searched for using LEXUS ENFORM app content can be set as a destination.
        Previous Destination Search Stores the coordinates, names, and date of up to 100 locations that have been set as destinations in the past.
        QR Code Search*1, *3, *4, *5, *8 POI information is displayed as a QR code. By scanning this code with a cellular phone, destination information can be obtained.
        Map Search A destination can be set by using the cursor on the map screen.
        Memory Point Search A destination can be set from the registered memory point.
        Intersection Search*1, *3, *4, *5 By specifying 2 streets, the point at which they intersect is set as the destination point.
        Motorway Entrance or Exit Search*1, *3, *4, *5 Searches for the destination by the name of the street that connects to a motorway (highway) entrance or exit.
        Destination Search Intersection or Motorway Entrance/Exit Search*6

        A destination can be set in 2 ways:


        • By specifying 2 streets, the point at which they intersect is set as the destination point.

        • Searches for the destination by the name of the street that connects to a motorway entrance or exit.
        Coordinate Search*1, *3, *4, *5, *6 A destination can be input by entering its coordinates.
        Phone Number Search*1, *2, *3, *4, *5, *7, *8 A destination can be input by entering its phone number.
        Postal Code Search*1, *3, *4, *5 A destination can be input by entering its postal code.
        Point Of Interest (POI) Near Cursor Search*1, *2, *3, *4, *5, *7, *8 A destination can be set by selecting the search point and point of interest category.
        MAP CODE Search*2, *7, *8 A destination can be set using a MAP CODE.
        Address Book (Memory Point) Search*6 A destination can be set from an item in the Address Book (Memory Point).
        Emergency Search*6 Performs a specific search for police stations, hospitals, Lexus dealers and fire stations.
        Panoramio Search*1 A destination can be set using location information applied to photos searched for in Panoramio.
        G Search*2 A destination can be set using information from the web site (G-memory point).
        Point Of Interest (POI) Smartphone Search*2 The POI searched for using a smartphone can be obtained and set as a destination.
        Easy destination search*2 Displays a list of frequently entered destinations (for commuting, etc.), allowing a destination to be easily set.
        Voice Recognition Search*1, *5 A destination can be set up by voice command input.
        Route Search Multiple Destination Setting Multiple destinations can be set. The sequence of the destinations can be rearranged as well.
        Multiple Route Search Searches for multiple routes.
        G Route Search*2 Searches for a route based on expected congestion information provided via the G-BOOK service.
        Search Condition Designation Searches for quick, eco, and short routes.*1, *3, *4, *5, *6, *8
        Searches for quick 1, quick 2, and short routes.*6
        Searches for the recommended route, the shortest route, a route that prioritizes the use of highways, a route that prioritizes the use of general roads, and other route.*2, *7
        Destination Recordering Changes the order of destinations when more than one destination is selected.
        Detour Search Changes the route to detour around a section of the route.
        Regulated Road Consideration Performs searches which consider regulated roads.
        Avoidance Area Searches for a route that avoids a designated area.
        Adjacent Road Search*2, *6, *7 Searches for a route that avoids a designated area.
        Auto Avoid Traffic Search Automatically changes route the heavy congestion.
        Guidance Voice Guidance Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
        Next Turn Guidance Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
        Motorway (Freeway, Highway) Mode Display Displays the distance to the next junction and exit, or POIs in the vicinity of the motorway exit.
        Motorway (Freeway, Highway) Exit or Junction Display When the vehicle approaches an exit or junction, the motorway guidance screen will be displayed.
        Motorway (Freeway, Highway) Direction of Travel Display Displays the direction of travel to take on the motorway.
        Real Freeway (Highway) Junction Display*2, *6, *7 Displays the junction and signage in 3D in the vicinity of a major junction while driving.
        Intersection Zoom-in Display Zooms in the map display when approaching an intersection.
        Turn List Display*1, *3, *4, *5, *6, *8 Displays a turn list on the right side of the 2-screen display.
        Arrow (Turn-by-Turn) Display*1, *3, *4, *5, *6, *8 Displays the direction of the next turn and the distance to the turn on the right side of the 2-screen display.
        Lane List Display*2, *6, *7 Display a lane list on the right side of the 2-screen display.
        Distance-to-destination Display Displays the distance from the present location to the destination.
        Direction Sign Display*2 Displays direction signs, similar to overhead highway signs, with route guidance information overlaid.
        Large Roundabout Guidance*2 Displays detailed guidance for large roundabouts.
        Large Intersection Guidance*2 Displays detailed guidance for large intersections.
        Importing Stored Route Guidance*1 Starts the guidance for the route set using the route information that is stored at the Lexus center and imported.
        Driver Support Information Icon Display Displays warning icons when the vehicle approaches areas such as school zones, railway crossings or high accident zones.
        Route Information Bar Display

        Displays the following information:


        • Street name of the current location.

        • Distance and travel time to the destination.

        • Distance to the destination and estimated time of arrival.

        • Distance to the destination and an arrow facing the destination (when off the route during guidance).
        Traffic Bar Display*1, *4, *5, *6, *8 Displays traffic information of congestion or accidents on the route using the traffic bar.
        Others Voice Recognition*1, *2, *5, *6, *7 Recognizes pre-programmed system commands spoken to operate the navigation system.
        Map Coverage Information Display Displays the map area that is stored on the microSD card.

        • *1: Models for Europe

        • *2: Models for China

        • *3: Models for G.C.C. Countries

        • *4: Destination package for Thailand, Singapore, Indonesia, Malaysia and Brunei

        • *5: Destination package for South Africa

        • *6: Models for Australia and destination package for New Zealand

        • *7: Destination package for Hong Kong and Macau

        • *8: Destination package for Taiwan

        • *9: Models for Australia

    2. Information Screen


      1. The functions of the information screen display are listed below.

        Tech Tips

        The display order of the menu icons may vary depending on the country where the vehicle is sold.

        Item Outline
        Fuel Consumption Information about fuel consumption per minute or per trip can be displayed.
        G-BOOK.com*1 G-BOOK on-line services can be operated.
        MY Request*1 Contents can be registered and registered contents can be accessed.
        Operator Service*1 Display of Information Acquired from the Operator Service Acquired information can be displayed and manually updated.
        Use the operator service A telephone call can be made to the operator service.
        G-memory*1

        • POIs searched for via a web site can be registered as a G-memory points.

        • A list of G-memory points can be displayed if registered.
        Traffic Information*2 By receiving the RDS-TMC and TPEG service, a list of the current traffic incidents is displayed along with information on the incident's distance and position relative to the vehicle.*3, *4
        By receiving the RTIC service, a list of the current traffic incidents is displayed along with information on the incident's distance and position relative to the vehicle.*1, *4
        By receiving the RDS-TMC service, a list of the current traffic incidents is displayed along with information on the incident's distance and position relative to the vehicle.*4
        Traffic Incidents*5 By receiving the RDS-TMC service, a list of the current traffic incidents is displayed along with information on the incident's distance and position relative to the vehicle.
        Parking Information*3 By receiving the TPEG service, the location and vacancy status of parking lots can be displayed. A parking lot can also be set as a destination.
        Street View*3 By connecting to the Internet, Google Street View can be displayed.
        Panoramio*3 By connecting to the Internet, users' pictures, comments and other information uploaded to Panoramio can be displayed.
        Weather Forecast Contents*6, *7 By connecting to the G-BOOK center, the latest weather information can be displayed.
        News Contents*6, *7 By connecting to the G-BOOK center, the latest news can be displayed.
        Nearest POI*6 By connecting to the G-BOOK center, information of POIs located around the current vehicle position can be obtained.
        Remote Maintenance Service Contents*6

        • Remote maintenance mail can be displayed and its settings can be changed.

        • Warning notifications received from the G-BOOK center can be displayed.
        e-mail*1 Received e-mails can be displayed.
        Notification*6 Notifications from the G-BOOK center can be displayed.
        Up-to-date Information*6, *7 By connecting to the G-BOOK center, the latest information can be displayed.
        G-Security Contents*6 Theft tracking (G-Security) settings can be changed.
        Safety Drive Information*6, *7 By connecting to the G-BOOK center, the speed limit and accident information of the road the vehicle is currently traveling on can be displayed.
        G-BOOK Contents*6, *7 The display of selected icons of the G-BOOK contents can be turned off.
        Display Order of G-BOOK Contents*6, *7 The display order of the G-BOOK contents icons can be changed.
        Data Communication Disconnection*7 Data communication between the G-BOOK center and a Bluetooth cellular phone can be disconnected.

        • *1: Models for China

        • *2: Except models for Australia and destination package for New Zealand

        • *3: Models for Europe

        • *4: This function is not made available in countries/areas where the necessary information service is not provided.

        • *5: Models for Australia and destination package for New Zealand

        • *6: Models with telematics transceiver connection type telematics system

        • *7: Models with cellular phone connection type telematics system

      2. The fuel consumption screen is displayed as illustrated below. This screen has the display functions listed below.

        A00000CE01
        *a The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.
        Item Outline
        (1) Clear Switch Clears all past information.
        (2) Average Speed Displays an average speed value that has been calculated by the combination meter assembly, which is based on the distance driven and time elapsed since the power switch was turned on (IG).
        (3) Elapsed Time Displays an elapsed time value that has been calculated by the combination meter assembly, which is based on the time elapsed since the power switch was turned on (IG).
        (4) Cruising Range Displays the approximate drivable distance.
        (5) Past Record Switch Changes the screen to the Past Record fuel consumption screen (per trip).
        (6) Energy Switch Changes the screen to the energy monitor screen.
        (7) Average Fuel Consumption per Minute

        • Displays the value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), since that the power switch was turned on (IG).

        • Displays the average fuel consumption for the last minute, or since clear was last selected.
        (8) Recovered Energy

        • Indicates the recovered energy for 1 minute with "E" symbols.

        • The recovered energy status is calculated by the hybrid vehicle control ECU.
        (9) Current Fuel Consumption per Minute Displays the instantaneous (current) fuel consumption value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), since that the power switch was turned on (IG).
        (10) Best Fuel Consumption Displays the best (most economical) fuel consumption per trip.
        (11) Average Fuel Consumption Displays the average fuel consumption for this trip.
        (12) Trip Information Switch Changes the screen to the average fuel consumption per minute screen.
        (13) Update Switch

        • Restarts calculation of the average fuel consumption value.

        • Sends the average fuel consumption reset signal to the combination meter assembly to update the graph.
        (14) Average Fuel Consumption per Trip

        • Displays the current record and the last 5 average fuel consumption per trip records or the current record and those since clear was last selected.

        • Starts calculating the average fuel consumption when the average fuel consumption displayed on the combination meter assembly is reset.
        (15) Energy Monitor

        Indicates the energy transmission direction, making it possible to confirm the current drive method (engine, motor or both), the power generation status of the engine and the status of regenerative energy use.


        • The State Of Charge (SOC) of the battery can be checked on the meter. The meter shows the SOC in 9-levels.

        • Displays the energy monitor status that has been calculated by the hybrid vehicle control ECU.

    3. Setup Screen


      1. The settings for the functions of the multi-display assembly are available from the setup screen.

        Tech Tips

        The display order of the menu icons may vary depending on the country where the vehicle is sold.

        Item Function
        General Settings

        • The time zone, the on/off setting of daylight saving time and automatic adjustment of the clock can be changed.*1, *2, *3, *4, *5

        • The settings for time shift, clock, etc. can be changed.*6

        • The language can be selected.*1, *3, *4, *6

        • The voice recognition language can be selected.*1

        • The unit of measurement for fuel consumption can be changed.

        • The startup/screen off images can be customized:


          • Images can be copied from a USB device.

          • Images can be deleted.

          • An image can be set as the startup or screen off image.

        • Automatic return from the audio or air conditioning screen to the home screen after audio or airconditioning operation can be changed.

        • The color of the screen buttons can be changed.

        • The selection sound can be set.

        • The pointer sound can be set.

        • The error sound can be set.

        • The pointer sound volume can be adjusted.

        • The strength of the vibrations generated on the touch pad can be set.

        • Registered information (personal data) can be cleared.

        • Navigation system software can be updated.

        • Third party software information used in the navigation system, such as notices, can be displayed.

        • The Gracenote database can be updated.*1

        • The set security mode on/off setting can be changed.*7
        Voice Settings

        • The voice guidance volume can be adjusted or switched off.

        • Voice recognition prompts can be set.*1, *2, *3, *4, *5, *6

        • Automatic volume settings for voice guidance while driving at high speeds can be set.*6

        • Voice guidance while using the audio and visual system or air conditioning can be set.

        • Voice guidance during route guidance can be set.*1, *2, *3, *4, *5, *7

        • Desired guidance tone can be set.*3, *4, *5, *7

        • Beep sound of navigation guidance can be set.*1, *2, *6
        Bluetooth Settings*1, *3, *4, *5, *7

        • Bluetooth device registration settings can be changed:


          • Bluetooth devices can be registered.

          • Bluetooth devices can be deleted.

          • Bluetooth devices can be selected.

          • Bluetooth devices can be edited.

        • Bluetooth system settings can be displayed or changed:


          • Automatic connection to a Bluetooth device

          • Bluetooth device name

          • Bluetooth device PIN-code

          • Bluetooth device address

          • Display of Bluetooth device connection status

          • Bluetooth device profile

        • Bluetooth internet connection can be set up.*1
        Bluetooth Settings*2, *6

        • Bluetooth devices can be registered.

        • Bluetooth devices can be deleted.

        • Bluetooth devices can be selected.

        • Bluetooth devices can be edited.

        • Bluetooth system settings can be displayed or changed:


          • Automatic connection to a Bluetooth device

          • Bluetooth device name

          • Bluetooth device PIN-code

          • Bluetooth device address

          • Display of Bluetooth device connection status

          • Bluetooth device profile
        Wi-Fi Settings*1, *8

        • The Wi-Fi function can be switched on/off.

        • Available networks that can be connected can be displayed.

        • Available networks that can be connected can be searched for.

        • A Wi-Fi Protected Setup (WPS) compatible Wi-Fi device can be connected quickly.

        • Wi-Fi settings can be changed:


          • The networks list can be edited.

          • An automatic connection to a preferred network can be set.

          • An automatic connection message can be set.
        Audio Settings

        • Sound quality can be adjusted.*1

        • Radio settings can be changed:*1, *2, *3, *4, *5, *7


          • The listing order of the station list can be set.

          • Setting to automatically seek an FM station that regularly broadcasts traffic information and station broadcasts can be set.*1

          • Setting to automatically select an FM station providing good reception if current reception worsens can be set.*1, *2, *3, *4, *5

          • Setting to switch to a broadcasting station within the same local program network can be set.*1, *2, *3, *4, *5

          • The FM radio text feature can be set.

        • DAB settings can be changed:*1, *2, *5


          • L-band in the tune range can be set.

          • DAB stations that regularly broadcast traffic information and station broadcasts can be automatically searched for.

          • A DAB station providing good reception is automatically selected if current reception worsens.

          • DAB text feature can be set.

        • An input terminal for iPod audio sound signals can be selected.

        • An input video signal format can be selected.

        • Cover art settings can be changed:*1


          • Cover art display in DISC mode

          • Cover art display in USB mode

          • Priority setting of the Gracenote database cover art in USB mode

          • Cover art display in iPod mode

          • Priority setting of the Gracenote database cover art in iPod mode

        • Cover art settings can be changed.*3, *4, *5, *6, *7

        • DVD settings can be changed:


          • Audio language

          • Subtitle language

          • DVD video menu language

          • Multi-angle mark display during multi-angle compatible disc playback

          • Viewer restriction level

          • Auto start playback

          • Volume difference adjustment between the lowest and highest volume

        • Data recorded to the sound library can be edited:*6


          • Edit an album

          • Delete an album

          • Confirm the hard drive information

        • CD recording settings can be changed:*6


          • Recording quality

          • Automatic recording mode

          • Manual recording mode
        Navigation Settings*1

        The navigation settings can be used to:


        • Set detailed online search settings such as:


          • Cost warning message display setting when connecting to the online search portal site

          • Synchronized settings of the online search portal site and navigation system

          • Roaming warning message settings

          • Memorization settings of the user name and password used when connecting to the portal site

          • Search engine settings of the online search

          • Deletion of the online search history

          • Changing of the user name and password used when connecting to the portal site

          • Deletion of the user name and password used when connecting to the portal site

        • Set detailed navigation settings such as average cruising speed.

        • Set detailed navigation settings such as displayed POI icon categories.

        • Set detailed navigation settings such as display of 3D landmarks.

        • Display the speed limit of the road currently being used.

        • Set the function that magnifies the map scale as the vehicle approaches a guidance point.

        • Set the cautionary message display shown when a regulated street is included in the route.

        • Set the display of pop-up information.

        • Manually adjust the current vehicle position mark.

        • Display the coverage areas and legal information.
        Navigation Settings*2

        The navigation settings can be used to:


        • Set and edit the home.

        • Set preset destinations.

        • Set and edit the address book.

        • Set and edit the areas to avoid.

        • Delete previous destinations.

        • Set detailed navigation settings such as:


          • The average cruising speed

          • The popup information display

          • The displayed POI icon categories

          • The voice guidance for the next street name

          • The viewing angle of the 3D map

          • Driver support information

          • The current vehicle position mark can be manually adjusted
        Navigation Settings*6

        The Navigation Settings can be used to:


        • Set and edit the home.

        • Set preset destinations.

        • Set memory points.

        • Delete previous destinations.

        • Set detailed navigation settings such as:


          • The visual city map display

          • The display of 3D landmarks

          • The daytime map color

          • The nighttime map color

          • The character size on the map

          • The display of the scale switching messages

          • The merging lane guidance

          • The warning point guidance

          • The cross-border guidance

          • The display of the 3D intersection zoomed map

          • The automatic zooming function

          • The average cruising speed

          • Animation of some screen displays

          • The displayed POI icon categories

          • The display of the 3D city map

          • The viewing angle of the 3D map

          • Manual adjustment of the current vehicle position mark

        • Transfer memory points stored in a USB memory device or disc to the system.

        • Copy memory points to a USB memory device or disc for backup.
        Navigation Settings*3, *4, *5, *7

        The Navigation Settings can be used to:


        • Set detailed navigation settings such as average cruising speed.

        • Set detailed navigation settings such as displayed POI icon categories.

        • Set detailed navigation settings such as display of 3D landmarks.

        • Display of the speed limit of the road currently being used.

        • Magnify the map scale for use as the vehicle guidance point.

        • Set the display of cautionary messages. (If the route includes traffic restrictions, seasonally restricted roads, etc.)

        • Set the display of pop-up information.

        • Manually adjust the current vehicle position mark.

        • Display the coverage areas and legal information.
        RTIC/Traffic Information Settings*8

        • The display of traffic information can be set.

        • Voice guidance for RTIC/traffic information can be set.

        • Traffic congestion consideration search can be set.

        • When using a Bluetooth device for data communication, a G-route search point can be set.

        • Driving record uploading can be set.

        • FM station selection for RTIC can be set.
        Telephone Settings

        • A Bluetooth phone can be registered or connected.*2, *6

        • Phone sound settings can be changed:


          • Ring tone

          • Ring tone volume

          • Message readout volume*1, *2, *5

          • SMS/MMS incoming tone*1, *2, *5

          • SMS/MMS incoming tone volume*1, *2, *5

          • e-mail incoming tone*1, *2, *5

          • e-mail incoming tone volume*1, *2, *5

          • In-call volume

        • Contact settings can be changed:*1, *3, *4, *5, *7


          • Contacts can be transferred from the connected cellular phone to the system, or added, edited, and deleted.*9

          • Favorites list can be registered.

          • Contacts deletion from the call history

          • Voice tags can be added, edited and deleted.*3, *4, *7

        • Contact/Call history settings can be changed:*2, *6


          • Automatic contact/history transfer function settings when a PBAP-compatible Bluetooth phone is connected

          • Contacts update

          • Contacts sorting*2

          • Favorites list registration

          • Contacts deletion from the favorites list

          • Contact image display

          • Call history deletion*10

          • New contact addition to the contact list*10

          • Contact list editing*10

          • Contact deletion from the contact list*10
        Telephone Settings

        • Message function settings can be changed:*1, *2, *5


          • Message forwarding from cellular phones

          • Automatic message readout

          • SMS/MMS notification pop-up

          • e-mail notification pop-up

          • Vehicle signature on outgoing messages

          • Message readout status on phone update

          • Incoming SMS/MMS display when an SMS/MMS message is received


            • Full Screen: The incoming SMS/MMS display screen is displayed and can be operated on the screen.

            • Drop-down: A message is displayed on the upper side of the screen.

          • Incoming e-mail display when an e-mail is received


            • Full Screen: The incoming e-mail display screen is displayed and can be operated on the screen.

            • Drop-down: A message is displayed on the upper side of the screen.

          • Display of messaging account names on the inbox tab

        • Telephone display settings can be changed:*1, *2, *5


          • Incoming call display

          • Display of the automatic contact/history transfer completion message

          • Automatic contact/history transfer (only available with Bluetooth phones that support PBAP)*1, *5

          • Contact list sorting*1, *5

          • Contact image display*1, *5

        • Phone display settings can be changed:*3, *4, *6, *7


          • Incoming call display

          • Display of the automatic contact/history transfer completion message

          • Automatic contact/history transfer (only available with Bluetooth phones that support PBAP)*3, *4, *7

          • Contact list sorting*3, *4, *7

          • Contact image display*3, *4, *7
        Traffic and Parking Settings*1

        • The voice guidance for traffic information can be switched off.

        • The traffic information icon display can be set.

        • The detour route function can be selected.

        • When searching for a route, a detoured route search that avoids traffic jams and so forth can be set.

        • The selection of traffic stations can be set to auto/manual.

        • The selected station can be displayed.

        • TPEG traffic information rception settings can be used to:


          • Increase frequency of automatic updates

          • Decrease frequency of automatic updates

          • Update manually

          • Cancel TPEG traffic information reception via Wi-Fi or a Bluetooth device

        • The roaming function of TPEG traffic information can be set.

        • Traffic information can be set to be received automatically, or to receive RDS-TMC traffic information only.

        • Display of parking icons can be displayed on the map can be set.

        • Parking lot information reception can be set.

        • The roaming function of parking lot information can be set.
        Traffic Information Settings*11

        • The FM station currently providing traffic information can be displayed. *2

        • The voice guidance for traffic information can be switched off.*3, *4, *5, *7

        • Display of the traffic information icon can be set.

        • Detour route function can be selected.*2

        • The usage of traffic information for estimating arrival time can be set.*2

        • The display of an arrow for free flowing traffic can be set.*2

        • The traffic incident voice warning can be set.*2

        • The traffic congestion avoidance function can be set to auto/manual.*3, *4, *5, *7

        • The selection of traffic stations can be set to auto/manual.*3, *4, *5, *7

        • The selected station can be displayed.*3, *4, *5, *7
        Vehicle Settings

        • Settings can be changed for the following maintenance items:


          • ENGINE OIL

          • OIL FILTER

          • ROTATION

          • TYRE/Tires

          • BATTERY

          • BRAKE PAD

          • WIPERS

          • LLC/Coolant

          • BRAKE OIL

          • ATF/Trans. fluid

          • SERVICE

          • AIR FILTER

          • PERSONAL

          • Reminder

          • Delete all

          • Reset all

          • Set dealer

        • Customizable vehicle settings can be changed.

        • The LEXUS parking assist-sensor system can be adjusted.*12
        LEXUS ENFORM Settings*2

        • The voice guidance volume can be adjusted or switched off.

        • The display of the phone data plan pop-up can be set.
        G-BOOK Settings*8

        The G-BOOK settings can be used to:


        • Set detailed functions: *13, *14


          • Canceling the contract

          • Setting the system to read the contents of the browser aloud automatically

          • Editing the My Request

          • Editing fixed form sentence of the software keyboard

        • Set privacy setting: *13, *14


          • Setting the communication lock

          • Changing the PIN number

          • Displaying the PIN number

        • Set communication settings:*14


          • Communication device to be used

          • Confirmation message when communication established

          • Communication settings for the cellular phone

          • Automatic communication settings

          • Network settings

        • *1: Models for Europe

        • *2: Models for Australia and destination package for New Zealand

        • *3: Models for G.C.C. Countries

        • *4: Destination package for Thailand, Singapore, Indonesia, Malaysia and Brunei

        • *5: Destination package for South Africa

        • *6: Models for China and destination package for Hong Kong and Macau

        • *7: Destination package for Taiwan

        • *8: Models for China

        • *9: For PBAP-compatible models

        • *10: PBAP non-compatible phone, or PBAP-compatible phone with the automatic telephone number transfer function set to off

        • *11: Except models for Europe

        • *12: Models with LEXUS parking assist-sensor system

        • *13: Models with telematics transceiver connection type telematics system

        • *14: Models with cellular phone connection type telematics system

  3. DIAGNOSIS


    1. For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.