DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. Front Drive Shaft


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the front differential side, and a Rzeppa type CVJ is used on the front axle side.

      2. A front drive shaft damper is provided to reduce vibration and noise.

        B002GXPC01
        *1 Rzeppa Type CVJ *2 Front Drive Shaft Damper
        *3 Tripod Type CVJ *4 Front Drive Shaft Assembly LH
        *5 Front Drive Shaft Assembly RH - -
        B002GEN Front Axle Side B002GEA Front Differential Side

    2. Rear Drive Shaft (AWD Models)


      1. An offset type CVJ is used on the differential side, and a Rzeppa type CVJ is used on the wheel side. Straightline stability has been ensured by making the shafts of the left and right rear drive shaft assemblies the same length.

        B002GJ1C01
        *1 Offset Type CVJ *2 Rzeppa Type CVJ
        B002GEN Differential Side B002GEA Rear Axle Side