FRONT SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. A low-pressure (N2) gas sealed front shock absorber assembly with a built-in rebound spring is used.

    2. A rebound spring is used to reduce roll angle and improve roll posture.

    3. The front shock absorber assembly achieves superior maneuverability, stability and riding comfort due to the optimized damping force.

    4. Internal friction has been reduced, thus allowing the absorber rod to move smoothly.

      B002GKZC01
      *1 Oil Seal *2 Absorber Rod
      *3 Rebound Spring *4 Base Valve
      *5 Piston Valve *6 Oil
      *7

      Low-pressure (N2) Gas

      		 *8 Rod Guide Bush

      Tech Tips

      To prevent hazardous conditions, make sure to empty the gas from the front shock absorber assembly before discarding the low-pressure (N2) gas sealed in the front shock absorber assembly. For details, refer to the Repair Manual.