HYBRID CONTROL SYSTEM


  1. CONSTRUCTION


    1. The power cable is a set of high-voltage, high-amperage cables that connect the HV battery with the inverter with converter assembly, the inverter with converter assembly with the MG1, MG2 and MGR*, and the inverter with converter assembly with the compressor with motor assembly.


      • *: AWD models

    2. The power cable is made of shielded cables in order to reduce electromagnetic interference.

    3. For identification purposes, the high-voltage wiring harness and connectors are color-coded orange to distinguish them from those of the ordinary low-voltage wiring.

      A01CS8FC01
      *A 2WD Models *B AWD Models
      *1 Compressor with Motor Assembly *2 Inverter with Converter Assembly
      *3

      P314 Hybrid Transaxle (Hybrid Vehicle Transaxle Assembly)


      • Motor Generator No. 1 (MG1)

      • Motor Generator No. 2 (MG2)

      		 *4 Power Cable
      *5 Service Plug Grip *6 Hybrid Battery Assembly
      *7

      Q211 Rear Drive Unit (Rear Traction Motor with Transaxle Assembly)


      • Motor Generator Rear (MGR)

      		 - -