BODY STRUCTURE


  1. FUNCTION


    1. Radiator Support Side Deflector


      1. A deflector is installed onto the radiator support to direct driving airflow into the radiator, thus leading to improvement in the ventilation performance of the vehicle front section.

        A0025VMC01
        *1 Radiator Support Side Deflector RH *2 Radiator Support Side Deflector LH

    2. Rear Combination Lights (Aero Stabilizing Fin)


      1. An aero stabilizing fin are provided on the lens of rear combination lights for enhanced aerodynamics.

      2. After passing the aero stabilizing fin, the air speed will increase and vortex flow will be generated.

      3. This vortex flow increases the speed of surrounding air while at the same time pulling the airflow towards the vehicle body.

      4. The airflow with higher speed passes near both sides of the vehicle body and ends at the rear of the vehicle. This helps to hold the vehicle body, thus stabilizing the vehicle.

        A0025WPC01
        *a Aero Stabilizing Fin *b Vortex
        B003YU9 Airflow B003YTW Hold the Vehicle from Both Side

    3. Floor Under Cover


      1. Various types of airflow routing parts are provided under the floor to control airflow. In addition, an under cover is provided to make the under floor area flat in order to ensure excellent aerodynamic performance.

      2. Fin-shaped rear under covers have been adopted to achieve higher diffuser efficiency, thereby ensuring stability.

        A0025PUC01
        *1 Engine Under Cover No. 1 *2 Engine Under Cover No. 2
        *3 Floor Under Cover No. 1 *4 Floor Under Cover No. 2
        *5 Rear Floor Cover No. 1 *6 Rear Floor Cover No. 2
        *a Fin-shaped - -