BODY STRUCTURE


  1. CONSTRUCTION


    1. Sound Absorbing and Vibration Damping Materials


      1. Silencer pads are provided on the engine compartment side of the dash panel, minimizing penetration of engine noise and road noise into the cabin.

        A0025WRC01
        *1 Dash Panel Insulator Outer - -

      2. Silencer pads are provided on the cabin side of the dash panel, minimizing penetration of engine noise and road noise into the cabin.

        A00263UC01
        *1 Dash Panel Insulator Inner - -
        *a A-A Cross Section *b Film
        *c Silencer Sheet - -

      3. To reduce the amount of road noise, engine noise, and droning sound that enters the cabin, the floor panel is coated with a floor silencer.

        A0025U1C01
        *A Models with 2GR-FKS Engine *B Models with 1AR-FE Engine
        A0025RN Floor Silencer - -

      4. Seals are provided for the front and rear doors at the rocker panel to minimize the penetration of road noise into the cabin.

        A00260LC01
        *1 Center Pillar Garnish (Front Door) *2 Center Pillar Garnish (Rear Door)
        *3 Rocker Outer Panel *4 Front Door Panel
        *5 Rear Door Panel - -
        *a A-A Cross Section *b B-B Cross Section
        *c C-C Cross Section *d Seal