METER / GAUGE SYSTEM


  1. FUNCTION


    1. Multi Buzzer


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 Engine Start while Driving Notice*1
        2 Engine Switch Operation while Driving Warning*1
        3 Front Seat Belt Warning (Level 2)
        4 Rear Seat Belt Warning*2
        5 Front Seat Belt Warning (Level 1)
        6 Unexpected Vehicle Motion Warning (Level 1)
        7 Unexpected Vehicle Motion Warning (Level 2)
        8 Brake Fluid Low Warning
        9 Engine Oil Pressure Warning
        10 EPS Warning
        11 Engine Coolant Temperature Warning
        12 Door Open when Shift Lever not in P Warning*1
        13 Entry and Start System Warning 1 (Intermittent)*1
        14 Key Reminder*3
        15 Brake System Temperature Rise or Active Test
        16 Temperature Warning/CRAWL Stop
        17 Entry and Start System Warning 2 (Intermittent)*1
        18 Entry and Start System Warning (Once)*1
        19 Multi-information Display Warning
        20 Dynamic Radar Cruise Control Cancelation due to Low Speed Warning*4
        21 Low Speed Zone Leading Vehicle Lost Warning*4
        22 Lane Departure Alert System Cancel Warning*5
        23 Lane Departure Alert System Warning*5
        24 Vehicle Sway Warning*5
        25 Immobiliser Certification Reminder
        26 Parking Brake Engaged Warning
        27 Door Open while Driving Warning
        28 S Mode Operation Reject Warning
        29 Road Sign Assist Indication*6
        30 Turn Signal/Hazard Warning Operation

        *1: Models with entry and start system

        *2: Models with rear seat belt warning function

        *3: Models without entry and start system

        *4: Models with dynamic radar cruise control system

        *5: Models with lane departure alert system

        *6: Models with road sign assist system

    2. Multi-information Display


      1. Display Function Flow


        • The multi-information display flow can be switched as shown in the flow chart below:

          A0025WNE03
          *a Conditions are not met
          *b Conditions are met
          *c If there are multiple display requests, items will be displayed in sequence.
          *d Item or display is selected by operating the steering pad switch assembly.
          *e ODO display is displayed for a certain period of time after the ignition switch is turned off.
          *f After ignition switch on (IG)

      2. Display Tab Operation


        • The information currently displayed can be switched using the RIGHT/LEFT switch on the steering pad switch assembly.

          A0025VXC01
          *A Models with Navigation System *B Models with Dynamic Radar Cruise Control System
          *C Models with Lane Departure Alert System - -
          *1 Steering Pad Switch Assembly - -
          *a LEFT Switch *b RIGHT Switch
          *c Drive Information *d Navigation Information
          *e Audio Information *f Driving Assist System Information
          *g Warning Message *h Settings
          *i The illustrations shown are examples only. - -
          B003YTW RIGHT switch operation B003YU9 LEFT switch operation

      3. Drive Information Mode Function (Models with Color Type Multi-information Display)


        • Drive information shows vehicle information such as drivable range and fuel consumption.

        • The drive information can be switched using the UP/DOWN switch on the steering pad switch assembly.

          A0025MDC01
          *A Models with Lane Departure Alert System *B AWD Models
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f Eco Driving Indicator
          *g Sway Warning *h AWD Control
          *i Blank *j The illustrations shown are examples only.
          B003YTW DOWN switch operation B003YU9 UP switch operation

      4. Setting Function


        • The items displayed on the multi-information display can be customized.

        • The items can be selected on the information setting screen.

          Pre-collision System (Models with Pre-collision System)
          Item Available Setting
          PCS

          • The pre-collision system can be set to on/off:


            • On

            • Off
          Pre-collision warning timing

          • The pre-collision system warning timing can be selected:


            • Far (Icon is displayed)

            • Middle (Icon is displayed)

            • Near (Icon is displayed)
          Lane Departure Alert System (Models with Lane Departure Alert System)
          Item Available Setting
          Warning Sensitivity

          • Alert sensitivity of alert system can be changed:


            • High

            • Standard
          Steering Assist

          • Setting for steering assist can be set to on/off:


            • On

            • Off
          Vehicle Sway Warning Sensitivity

          • Vehicle sway warning sensitivity can be selected:


            • High

            • Standard

            • Low
          Vehicle Sway Warning

          • Vehicle sway warning can be set to on/off:


            • On

            • Off
          Road Sign Assist (Models with road sign assist system)
          Item Available Setting
          Road Sign Assist

          • The road sign assist system can be set to on/off:


            • ON

            • OFF
          Excess Speed Notification

          • The excess speed notification method can be selected:


            • No Notice

            • Only Visual

            • Visual & Audible
          Excess Speed Notification Level

          • The excess speed notification level can be selected:


            • High

            • Mid

            • Low
          Other Notifications

          • The other notifications method can be selected:


            • No Notice

            • Only Visual

            • Visual & Audible
          Vehicle settings (Models with 2GR-FKS Engine)
          Item Available Setting
          Power Mode

          • The power mode can be set to on/off:


            • ON

            • OFF
          Blind Spot Monitor System (Models with Blind Spot Monitor System)
          Item Available Setting
          BSM

          • The blind spot monitor system can be set to on/off:


            • ON

            • OFF
          Meter Settings
          Item Available Setting
          Language

          • The language used on the multi-information display can be selected:


            • English

            • Russian

            • French

            • Spanish
          Unit

          • The unit displayed on the multi-information display can be selected.


            • km (L/100 km)

            • km (km/L)

            • miles (MPG)
          Eco Driving Indicator Light

          • The Eco Driving Indicator Light can be switched to ON or OFF.


            • ON

            • OFF
          TOP Switch Settings Displays how to register the screen which is displayed when the TOP switch is pressed.
          Drive Information 1

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Average Fuel Consumption Between Reset Operations

            • Total Average Vehicle Speed Between Reset Operations

            • Elapsed Time Between Reset Operations

            • Total Cruising Distance

            • Average Fuel Consumption After Refueling

            • Cruising Range

            • Elapsed Time After Engine Start-up

            • Average Vehicle Speed After Engine Start-up

            • Cruising Distance After Engine Start-up

            • Average Fuel Consumption After Engine Start-up
          Drive Information 2

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Average Fuel Consumption Between Reset Operations

            • Total Average Vehicle Speed Between Reset Operations

            • Elapsed Time Between Reset Operations

            • Total Cruising Distance

            • Average Fuel Consumption After Refueling

            • Cruising Range

            • Elapsed Time After Engine Start-up

            • Average Vehicle Speed After Engine Start-up

            • Cruising Distance After Engine Start-up

            • Average Fuel Consumption After Engine Start-up
          Drive Information 3

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Average Fuel Consumption Between Reset Operations

            • Total Average Vehicle Speed Between Reset Operations

            • Elapsed Time Between Reset Operations

            • Total Cruising Distance

            • Average Fuel Consumption After Refueling

            • Cruising Range

            • Elapsed Time After Engine Start-up

            • Average Vehicle Speed After Engine Start-up

            • Cruising Distance After Engine Start-up

            • Average Fuel Consumption After Engine Start-up
          Interruption Display

          • The following displays that appear as soon as the set conditions are met can be switched to ON or OFF.


            • Turn-by-turn Navigation Display*

            • Incoming Telephone Display

            • Rheostat
          Accent Color

          • The accent color can be changed:


            • Clear Blue

            • Clear Turquoise

            • Deep Orange

            • Radiant Orange
          Initialization The setting items can be initialized.

          *: Models with Navigation System

      5. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the current display on the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 AWD Test Mode*1 - -
        CDY-2 - -
        CDY-4*1 - -
        ADJUSTING FORWARD CAMERA*2 - -
        ADJUSTING FRONT RADAR BEAM*3 - -
        CHECKING PCS BRAKE*4 - -
        CHECKING CRUISE CONTROL C/D*3 - -
        CHECKING CRUISE CONTROL BRAKE*3 - -
        BRAKE!*4 - -
        Holding in Engine Switch Will Cause an Emergency Engine Stop.*5 Blinks Sounds
        To Restart Car, Shift Lever to "N" and Press Engine Switch.*5 Blinks Sounds
        The Engine Has Stopped. Please Put Shift Lever into "P". Blinks Sounds
        The Engine Has Stopped. Please Stop Your Car in a Safe Place. Blinks Sounds
        2 Dynamic radar cruise control warning reminder indicator (image display)*3 - -
        Lane departure alert warning reminder indicator (image display)*2 - -
        Braking Power Low Stop in a Safe Place See Owner's Manual Blinks Sounds
        The Accelerator is Stuck. Please Depress Brake Pedal to Stop Car. Blinks Sounds
        3 Door open (while driving)*6 Blinks Sounds
        Door open - -
        Clearance sonar detection (image display)*7 - -
        Check Park Sonar System*7 Illuminates -
        Clean Park Sonar*7 Illuminates -
        4 Auto Power OFF to Conserve Battery - -
        5 EPS Failure. Steering Wheel Harder to Turn. Illuminates Sounds
        Voltage Abnormality. Steering Wheel Harder to Turn. Illuminates Sounds
        Check Power Steering System Illuminates Sounds
        Release Parking Brake Blinks Sounds
        Key not detected*5 Blinks Sounds
        6 LDA Hold Steering Wheel*2 - -
        LDA Steering Assist Unavailable Hold Steering Wheel*2 Illuminates -
        7 SRS Airbag System Malfunction Visit Your Dealer Illuminates Sounds
        Antilock Brake System Malfunction Visit Your Dealer - Sounds
        Engine Coolant High Temperature Illuminates -
        Charging System Malfunction Stop in a Safe Place See Owner's Manual Illuminates -
        Radar Cruise Control Unavailable Clean Sensor*3 Illuminates Sounds
        Radar Cruise Control Unavailable*3 Illuminates Sounds
        Radar Cruise Control Unavailable Depress Brake to Resume Driving*3 - -
        Check Entry & Start System*5 Blinks Sounds
        BSM not available*8 Illuminates Sounds
        Cruise Control Malfunction Visit Your Dealer*3 Illuminates Sounds
        Cruise Control Fault Press Brake to Deactivate Visit Your Dealer*3 Illuminates Sounds
        Lane Departure Alert Malfunction Visit Your Dealer*2 Illuminates -
        Forward Camera System Unavailable*4 - -
        Lane Departure Alert Turned On Steering Assist Active*2 - -
        Lane Departure Alert Turned On Steering Assist Inactive*2 - -
        Forward Camera System Unavailable Clean Windshield*2, *4, *10 - -
        Pre-collision System Malfunction Visit Your Dealer*4 Illuminates Sounds
        Check BSM System*8 Illuminates Sounds
        Oil Pressure Low Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Transmission Fluid High Temperature Illuminates Sounds
        Check AWD System*1 Illuminates Sounds
        Radar Cruise Active Please Pay Attention to Other Vehicles - -
        Lane Departure Alert Unavailable Below Approx 50km/h*2 - -
        Lane Departure Alert Unavailable at Current Speed*2 - -
        Check Engine Reduced engine power Visit Your Dealer Illuminates Sounds
        Check Engine Visit Your Dealer Illuminates Sounds
        Reduced engine power Visit Your Dealer Illuminates Sounds
        Engine maintenance required Visit Your Dealer Illuminates Sounds
        8 Dynamic radar cruise control indicator (image display)*3 - -
        Lane departure alert indicator (image display)*2 - -
        Engine Stopped, Steering Wheel Harder to Turn. Illuminates Sounds
        Turn Power OFF*5 Blinks Sounds
        Would you like to take a rest?*2 - Sounds
        Please take a rest*2 - Sounds
        Key detected in vehicle*5 Blinks -
        Moon Roof opened*9 Blinks Sounds
        Depress brake pedal, touch engine switch with key*5 Blinks Sounds
        Depress brake pedal and push engine switch to start*5 - -
        The Accelerator is Stuck. Please Check the Accelerator. Blinks Sounds
        9 Steering Lock active Blinks Sounds
        AWD system overheated. 2WD mode engaged.*1 Blinks Sounds
        AWD system overheated. Switching to 2WD mode.*1 Blinks Sounds
        Brake Override Malfunction Visit Your Dealer Illuminates Sounds
        10 Key Battery Low*5 Illuminates Sounds
        Headlight System Malfunction Visit Your Dealer*11 Illuminates Sounds
        Engine Oil Level Low Add or Replace - -
        Headlight System Malfunction Visit Your Dealer*10, *11 Illuminates Sounds
        Check RSA System*12 Illuminates Sounds
        Accelerator and Brake Pedals Depressed Simultaneously Blinks -
        11 Washer Fluid Low - -
        Fuel Low - -
        Traction Control Turned Off - -
        To Activate Auto High Beam, Switch Headlights to High Beam*10 - -
        Depress brake pedal and push engine switch to start*5 - -
        VSC Turned Off Pre-collision Brake System Unavailable*4 - -
        Pre-collision System Unavailable*4 - -
        Pre-Collision System Unavailable*4 - -
        Pre-Collision System Unavailable Clean Sensor*4 - -
        Pre-collision System Off*4 - -

        *1: AWD Models

        *2: Models with lane departure alert system

        *3: Models with dynamic radar cruise control system

        *4: Models with pre-collision system

        *5: Models with entry and start system

        *6: If the vehicle has reached a speed of 5 km/h (3 mph)

        *7: Models with TOYOTA parking assist-sensor system

        *8: Models with blind spot monitor system

        *9: Models with sliding roof system

        *10: Models with automatic high beam system

        *11: Models with automatic headlight beam level control system

        *12: Models with road sign assist system

  2. OPERATION


    1. Eco Driving Indicator Light and Eco Driving Indicator Zone Display


      1. The following table shows the operation of Eco Driving Indicator Light and Eco driving indicator zone display in different driving conditions:

        Driving Condition Eco Driving Indicator Light Eco Driving Indicator Zone Display
        While Stopped Turns off A0025P7
        While Eco Driving Turns on A0025PA
        While Non-eco Driving Turns off A00260O

        When any of the following conditions is met, operation is stopped.


        • Engine switch off

        • Engine stopped

        • Shift lever is not in D.

        • The vehicle is being driven at a speed of 130 km/h (81 mph) or higher.

        • NORMAL mode is not selected.

        		 Turns off A002628