BRAKE CONTROL SYSTEM


  1. CONSTRUCTION


    1. The brake actuator assembly consists of the brake actuator portion and skid control ECU.

      A0025N7C01
      *a Skid Control ECU *b Brake Actuator Portion

    2. The brake actuator is constructed with the following hydraulic circuit:

      A0025VPC02
      *1 Brake Master Cylinder Sub-assembly *2 Brake Actuator Assembly
      *3 Master Cylinder Pressure Sensor *4 Master Cylinder Cut Solenoid Valve
      *5 Pressure Holding Solenoid Valve *6 Pressure Reduction Solenoid Valve
      *7 Pump *8 Reservoir
      *9 Front Brake Caliper (Right Side) *10 Rear Brake Caliper (Left Side)
      *11 Rear Brake Caliper (Right Side) *12 Front Brake Caliper (Left Side)