AUDIO AND VISUAL SYSTEM

Audio Head Unit

1. In consideration of the unity with the instrument panel, a uniquely sized audio head unit is provided.

2. A Thin Film Transistor Liquid Crystal Display (TFT LCD) is used for the multi-display of the radio and display receiver assembly*1 or navigation receiver assembly*2. The multi-display shows the audio screen, Bluetooth hands-free screen, vehicle information screen, etc. and can be operated using touch operation, flick operation or drag operation.*3

   *1: Models with touch system or display audio system

   *2: Models with navigation system

   *3: Flick operation or drag operation may not be possible on all screens.

   

   *a

   Flick Operation

   *b

   Drag Operation

3. Capacitive type touch switches are provided on both sides of the multi-display, realizing a flat and unified audio panel design. The sensitivity of the capacitive type touch switches can be adjusted.

4. The radio text broadcast by FM radio stations is displayed in the radio text area, such as program information and currently broadcasted song information.

5. Discs containing MPEG audio layer-3 (MP3) files, Windows Media Audio (WMA) files and Advanced Audio Coding (AAC) files can be played.

6. Discs with the marks shown below can be played.

   

7. Digital Audio Broadcast (DAB) (Models for Australia)

   
   

   • Digital Audio Broadcast (DAB) reception is available. This mostly prevents broadcast interference, achieving clear reception with high quality sound.

   • The time shift operation function can be used to play back DAB programs at a later time.

   Tech Tips

   The amount of playback possible depends on the bit rate of the DAB station to be recorded, the amount of DAB unit memory, and the time at which reception of the broadcast began.

8. Application (Models for Russia)

   
   

   • By operating the applications, which are preinstalled to the radio and display receiver assembly, with on-screen commands on the multi-display, functions such as the e-mail function and MirrorLink function can be used.

   • By downloading new applications from the Toyota portal site and installing them to the radio and display receiver assembly, more functions will be available. (Models with Touch System (with Navigation ECU))

9. TOYOTA Link Service (Models for Australia)

   
   

   • This service makes it possible to operate specified applications on the navigation system by using Bluetooth to connect the navigation system to a cellular phone with the TOYOTA Link application installed.

Status Display (Models with Display Audio System or Navigation System)

1. The user can confirm the Bluetooth connection status, signal strength and remaining battery level of a cellular phone which is connected by Bluetooth, using the status bar displayed on the screen. The status bar is displayed in all mode.

   

   *a	The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.

   Item		Outline
   (1)	Bluetooth connection status	Displays the Bluetooth connection status between the audio head unit and cellular phone.
   (2)	Cellular phone signal strength*	Displays the signal strength of the cellular phone connected by Bluetooth.
   (3)	Cellular phone battery level*	Displays the battery level of the cellular phone connected by Bluetooth.

   Tech Tips

   *: May not be displayed depending on the Bluetooth specifications and profiles of the cellular phone.

"GreenEdge" Speakers

1. "GreenEdge" speakers that efficiently convert electricity to sound with less sound corruption have been adopted. These speakers realize high sound pressure levels with low power consumption while still maintaining superb sound quality.

2. Due to the adoption of acoustic lenses, the directionality of the speaker output is improved, enhancing the area where the acoustics are effective.

   

Application

1. Available applications are listed in the following table:

   Application		Outline
   Preinstalled Applications	Picture*1	When a USB device is connected to the radio and display receiver assembly, pictures stored on the USB device can be displayed on the multi-display as well as played as a slide show.*4
   	E-mail	When a Bluetooth phone is connected to the radio and display receiver assembly, e-mails and Short Message Service (SMS) messages received on the phone can be displayed or read out. In addition, it is possible to reply to the received e-mails and send Short Message Service (SMS) messages.*5
   	MirrorLink*2	To utilize the MirrorLink function, it is necessary to connect a compatible smartphone*6 to the radio and display receiver assembly using a USB cable. After a connection is established, the screen of the smartphone is displayed on the multi-display. Using this screen, the user can operate applications installed on the smartphone and listen to the audio of the smartphone via the vehicles speakers.
   	Toyota Eurocare*1	With a Bluetooth phone connected to the radio and display receiver assembly, a call*7 to Toyota Eurocare can be made. Upon receiving the information from the GPS satellite, the vehicle's current location is displayed on the Toyota Eurocare call screen so that the user will be able to promptly tell the operator the current location of the vehicle.
   Downloadable Applications*1*3		New applications can be downloaded from the Toyota portal site*8 and installed to the radio and display receiver assembly via a USB device. Using a Bluetooth connected cellular phone, information and update programs necessary for the application are accessible via the content provider of the application.

   *1: Models with touch system (with navigation ECU)

   *2: MirrorLink is a registered trademark of Car Connectivity Consortium, Inc.

   *3: A Bluetooth compatible device and a portal account are needed to use this application. To get a portal account, access the Toyota portal site (URL:www.my.toyota.eu).

   *4: Available image data formats: JPEG, PNG and BMP

   *5: Messages may not be displayed depending on the message service or profile that the connected Bluetooth phone supports.

   *6: This function is not available if the smartphone does not support Car Connectivity Consortium standards.

   *7: Calls are only available when the user is in a Toyota Eurocare supported country and the country in which the vehicle is currently located has been selected using the multi-display.

   *8: For details about Toyota portal site, refer to www.my.toyota.eu.

   Figure 1. MirrorLink

   

   *a	MirrorLink Screen	*b	Smartphone
   *c	Connection via USB cable	*d	The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.

   Figure 2. Toyota Eurocare

   

   Figure 3. Application