SFI SYSTEM


  1. CONSTRUCTION


    1. This non-contact type throttle position sensor uses a Hall IC, which is mounted on the throttle body with motor assembly.


      1. The Hall IC is surrounded by a magnetic yoke. The Hall IC converts the changes that occur in the magnetic flux into electrical signals, and outputs them in the form of throttle valve position signals to the ECM.

      2. The Hall IC contains circuits for the main and sub signals. It converts the throttle valve opening angle into electric signals that have differing characteristics, and outputs them to the ECM.

        A018GRYE01

        Tech Tips

        The inspection method differs from a contact type throttle position sensor because this non-contact type throttle position sensor uses a Hall IC. For details, refer to the Repair Manual.