BODY STRUCTURE


  1. CONSTRUCTION


    1. Anti-corrosion Sheet Steel


      1. Anti-corrosion sheet steel and aluminum are used as shown in the following illustration:

        Figure 1. Upper Body

        A01QDN8C01
        B002AVN Aluminum B002ARR Anti-corrosion Sheet Steel

        Figure 2. Under Body

        A01QDTTC01
        B002ARR Anti-corrosion Sheet Steel - -

    2. Anti-chipping Application and Rust-resistant Performance


      1. A large body rocker panel molding assembly is used to protect the paint surface from icy snow or gravel and to achieve a high level of rust resistance.

      2. Wax is applied to the edge of the hood panel, door lower portion, door hinge assembly and hood hinge assembly to improve rust-resistant performance.

        A01QDIIC02
        *1 Hood Hinge Assembly RH *2 Hood Hinge Assembly RH
        *3 Front Door Hinge Assembly Upper LH *4 Front Door Hinge Assembly Lower LH
        *5 Rear Door Hinge Assembly Upper LH *6 Rear Door Hinge Assembly Lower LH
        *7 Body Rocker Panel Molding Assembly *8 Front Door Panel Sub-assembly LH
        *a A-A Cross Section *b Wax

      3. Polyvinyl Chloride (PVC) coating is applied to the wheel housings, and other parts that are located where they are susceptible to stone chipping damage, improving the rust-resistance of these areas.

        A01QDYMC01
        *a Left Side View *b Right Side View
        *c Edge Seal - -
        B002AVN Under Coating Area - -