METER / GAUGE SYSTEM


  1. FUNCTION


    1. Multi Buzzer


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 Front Seat Belt Warning (Level 2)
        2 Front Seat Belt Warning (Level 1)
        3 Lane Departure Alert Cancelation*1
        4 Brake Fluid Low Warning
        5 Engine Oil Pressure Warning
        6 EPS Warning
        7 Lane Departure Alert Warning*1
        8 Engine Coolant Temperature Warning
        9 Door Open when Shift Lever not in P Warning
        10 Entry and Start System Warning (Intermittent)
        11 Entry and Start System Warning (Intermittent, Maximum 9 Times)
        12 Entry and Start System Warning (Once)
        13 Multi-information Display Warning
        14 Electric Parking Brake Cancel Warning
        15 Dynamic Radar Cruise Control Cancelation due to Low Speed Warning*1
        16 Lane Departure Alert No Hands Detect Warning*1
        17 Immobiliser Certification Reminder
        18 Speed Limit Exceeded Warning*2
        19 Speed Limit Exceeded Warning*3
        20 Parking Brake Engaged Warning
        21 Door Open while Driving Warning
        22 Drift Run Warning*1
        23 Road Sign Assist Indication*4
        24 Sport Shift Reject Warning
        25 Light Reminder
        26 Rev Indicator
        27 Turn Signal/Hazard Warning Operation

        *1: Models with lexus safety system +

        *2: Models for G.C.C. countries

        *3: Models for Europe

        *4: Models with road sign assist system

    2. Multi-information Display


      1. Display Function Flow


        • The multi-information display can be switched as shown in the flow chart below:

          B002AQPE02
          Item Display Change Condition
          *a Conditions are not met.
          *b Conditions are met.
          *c If there are multiple display requests, items will be displayed in sequence.
          *d An item or display is selected by operating the steering pad switch assembly.
          *e ODO display is displayed for a certain period of time after the engine switch is turned off.
          *f After engine switch on (IG).

      2. Display Tab Operation


        • The information currently displayed can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.

          B002AQKC01
          *A Models with Navigation System - -
          *1 Steering Pad Switch Assembly - -
          *a LEFT Switch *b RIGHT Switch
          *c Drive Information *d "F" Information
          *e Navigation Information *f Audio Information
          *g Driving Assist System Information *h Message
          *i Settings *j The illustrations shown are examples only.
          B002AUN RIGHT switch operation B002AQQ LEFT switch operation

      3. Drive Information


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

        • The drive information display can be changed using the UP/DOWN switch of the steering pad switch assembly.

          B002AV1C01
          *A Models with Tire Inflation Pressure Display Function *B Models with Lexus Safety System +
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f Tire Pressure Indicator
          *g Gear Position Indicator *h Vehicle Sway Warning
          *i Unit Change *j Blank
          *k The illustrations shown are examples only. - -
          B002AUN DOWN switch operation B002AQQ UP switch operation

      4. "F" Information


        • The "F" information tab shows vehicle information such as G-force and tire pressure*.

          *: Models with tire pressure warning system

        • The "F" information currently displayed can be changed using the UP/DOWN switch of the steering pad switch assembly.

          B002AU4C01
          *A Models with Tire Inflation Pressure Display Function - -
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Lap Timer *d Lap Time History
          *e Torque Distribution *f G-force
          *g Vehicle Monitor *h The illustrations shown are examples only.
          B002AUN DOWN switch operation B002AQQ UP switch operation

      5. Setting Function


        • The items displayed on the multi-information display can be customized.

        • The following items can be selected on the information setting screen.

          Item Available Setting
          Lane Departure Alert*1

          • The following lane departure alert system settings can be changed:


            • Steering Assist (On / Off)

            • Sensitivity (High / Standard)

            • Vehicle Sway Warning (On / Off)

            • Vehicle Sway Sensitivity (Low / Standard / High)
          Pre-crash Safety*1

          • The following pre-crash safety system settings can be changed:


            • Pre-crash Safety System (On / Off)

            • Sensitivity (Far / Mid / Near)
          Blind Spot Monitor*2

          • The following blind spot monitor system settings can be changed:


            • Blind Spot Monitor System (On / Off)
          Vehicle Speed Warning*3

          • The vehicle speed warning can be switched:


            • ON

            • OFF (Default)

          Tech Tips

          The vehicle speed for warning activation can be set at increments of 1 km/h or 1 mph between 50 and 120 km/h*4 or 50 and 160 km/h (30 and 100 mph)*5 or 50 and 200 km/h*6
          Road Sign Assist*7

          • The following road sign assist system settings can be changed:


            • Road Sign Assist (On / Off)

            • Excess Speed (No Notice / Only Visual / Visual and Audible)

            • Notification Level (0 to 10 km/h (0 to 10 mph))

            • Others (No Notice / Only Visual / Visual and Audible)
          Tire Pressure Warning*8 Tire Pressure Warning System can be reset.
          Maintenance Required Reminder*9 The accumulated vehicle driving distance memorized in the combination meter assembly can be reset.
          Language

          • The language used on the multi-information display can be selected:


            • English

            • French

            • Spanish

            • German*10

            • Italian*10

            • Russian*10

            • Chinese*11
          Unit

          • The unit displayed on the multi-information display can be selected:


            • miles (MPG) (Default*5)

            • km (L/100 km) (Default*6)

            • km (km/L) (Default*9)
          Eco Driving Indicator Light

          • The Eco Driving Indicator Light can be switched:


            • ON (Default)

            • OFF
          TOP Switch Settings

          • The item that is displayed when the TOP switch is pressed can be selected among the following:


            • Drive Information 1 (Default)

            • Drive Information 2

            • Drive Information 3

            • Lap Timer

            • Lap Time History

            • Torque Distribution

            • G-force

            • Vehicle Monitor

            • Tire Pressure Indicator*12

            • Gear Position Indicator

            • Sway Warning*1

            • Unit Change

            • Blank

            • Navigation Information*13

            • Audio Information

            • Driving Assist System Information

            • Message

            • Settings
          Drive Information 1

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) (Default of upper area)

            • Total Average Fuel Consumption Between Reset Operations (Default of lower area)

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range

            • Cruising Range After Engine Start-up

            • Blank
          Drive Information 2

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Total Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations (Default of lower area)

            • Average Vehicle Speed After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range (Default of upper area)

            • Cruising Range After Engine Start-up

            • Blank
          Drive Information 3

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Total Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling (Default of upper area)

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up (Default of lower area)

            • Cruising Range

            • Cruising Range After Engine Start-up

            • Blank
          Interruption Display

          • The following displays that appear as soon as the set conditions are met can be switched to ON (Default) or OFF:


            • Turn-by-turn Navigation Display*12

            • Incoming Telephone Display

            • Rheostat

            • TVD Mode
          Rev Indicator

          • The rev indicator can be switched:


            • ON (Default)

            • OFF

          • The rev indicator setting can be selected when the rev indicator is ON:


            • Setting 1 (fast timing)

            • Setting 2 (middle timing) (Default)

            • Setting 3 (slow timing)
          Tachometer Peak Hold Function

          • The tachometer peak hold function can be switched:


            • ON (Default)

            • OFF
          Drive Mode Screen

          • The SPORT S mode display can be changed:


            • White ribbon type tachometer (Default)

            • Digital type tachometer


          • The SPORT S+ mode display can be changed:


            • White ribbon type tachometer

            • Digital type tachometer (Default)


          • The CUSTOMIZE mode display can be changed:


            • ECO Mode

            • NORMAL Mode (Default)

            • SPORT S Mode (White ribbon type tachometer)

            • SPORT S+ Mode (Digital type tachometer)
          Initialization The set items can be initialized.

          *1: Models with lexus safety system +

          *2: Models with blind spot monitor system

          *3: Except models for G.C.C countries

          *4: Destination packages for Brunei, Indonesia, Taiwan, Philippines and South Korea

          *5: Destination packages for United Kingdom

          *6: Destination packages for other countries

          *7: Models with road sign assist system

          *8: Models with tire pressure warning system

          *9: Destination packages for South Korea

          *10: Models for Europe

          *11: Except models for Europe

          *12: Models with tire inflation pressure display function

          *13: Models with navigation system

      6. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the current display on the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 TVD Test Mode - -
        CDY-2 - -
        ADJUSTING LDA CAMERA*1 - -
        ADJUSTING FRONT RADAR BEAM*1 - -
        ERROR ADJUSTING FRONT RADAR BEAM*1 - -
        ADJUSTING FRONT RADAR BEAMVERTICAL*1 - -
        ADJUSTING FRONT RADAR BEAMHORIZONTAL*1 - -
        CHECKING PRE-CRASH BRAKE*1 - -
        CHECKING CRUISE CONTROL C/D*1 - -
        CHECKING CRUISE CONTROL BRAKE*1 - -
        Headlight System Uninitialized Visit Your Dealer - -
        BRAKE!*1 - -
        2 Braking Power Low Stop in a Safe Place See Owner's Manual Blinks Sounds
        3 Door open (while driving)*2 Blinks Sounds
        Door open - -
        Clearance sonar detection (image display)*3 - -
        Parking Assist Malfunction*3 Illuminates -
        Clean Parking Assist Sensor*3 Illuminates -
        4 Power Turned Off to Save Battery - -
        5 EPB can't be Released Close Door and Fasten Your Seatbelt Blinks Sounds
        6 Shift to P Before Exiting Vehicle Blinks Sounds
        7 Check Power Steering System Illuminates Sounds
        Release Parking Brake Blinks Sounds
        Vehicle May Roll Shift to P Blinks Sounds
        EPB Activation Stopped Incompletely Blinks Sounds
        Key Not Detected Check Key Location Blinks Sounds
        Release Parking Brake while Depressing Brake - Sounds
        Release Accelerator Blinks Sounds
        8 Slippery Road Cannot Shift to Lower Gear Illuminates Sounds
        Speed Limit Exceeded*4 - Sounds
        LDA Hold Steering Wheel*1 - -
        LDA Steering Assist Unavailable Hold Steering Wheel*1 Illuminates -
        LDA Hold Steering Wheel (Level 2)*1 Illuminates Sounds
        Parking Brake Overheated Parking Brake Unavailable Illuminates Sounds
        9 Check Engine Visit Your Dealer Illuminates Sounds
        Check Engine Reduced Engine Power Visit Your Dealer Illuminates Sounds
        Reduced Engine Power Visit Your Dealer Illuminates Sounds
        SRS Airbag System Malfunction Visit Your Dealer Illuminates Sounds
        Antilock Brake System Malfunction Visit Your Dealer - Sounds
        Engine Coolant Temp High Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Radar Cruise Control Unavailable Clean Sensor*1 Illuminates Sounds
        Radar Cruise Control Unavailable*1 Illuminates Sounds
        Check Entry & Start System Blinks Sounds
        Blind Spot Monitor Unavailable*5 Illuminates Sounds
        Cruise Control Malfunction Visit Your Dealer Illuminates Sounds
        Lane Departure Alert Malfunction Visit Your Dealer*1 Illuminates Sounds
        Forward Camera System Unavailable*1 Illuminates Sounds
        Lane Departure Alert Unavailable*1 Illuminates Sounds
        Lane Departure Alert Turned On Steering Assist Active*1 - -
        Lane Departure Alert Turned On Steering Assist Inactive*1 - -
        Forward Camera System Unavailable Clean Windshield*1 Illuminates Sounds
        Pre-Crash Safety Malfunction Visit Your Dealer*1 Illuminates Sounds
        Blind Spot Monitor System Malfunction Visit Your Dealer*5 Illuminates Sounds
        Oil Pressure Low Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Transmission Fluid Temp High See Owner's Manual Illuminates Sounds
        Parking Brake Unavailable Illuminates Sounds
        Electronic Parking Brake Malfunction Visit Your Dealer Illuminates Sounds
        Radar Cruise Active Please Pay Attention to Other Vehicles*1 - -
        Lane Departure Alert Unavailable Below Approx 50km/h*1 - -
        Lane Departure Alert Unavailable Below Approx 32MPH*1 - -
        Lane Departure Alert Unavailable at Current Speed*1 - -
        10 Dynamic radar cruise control indicator (image display)*1 - -
        Lane departure alert indicator (image display)*1 - -
        Turn Off Vehicle Blinks Sounds
        Would You Like to Take Rest?*1 - Sounds
        Please Take Rest*1 - Sounds
        Key Left inside Vehicle - -
        Turn Lights Off Blinks Sounds
        Moon Roof Open*6 Blinks Sounds
        Window Open Blinks Sounds
        Window / Moon Roof Open*6 Blinks Sounds
        Depress Brake and Then Touch Key to Engine Switch - -
        Depress Brake and Then Start Engine Blinks Sounds
        Shift to P position to Start Blinks Sounds
        11 Steering Lock active Blinks Sounds
        Parking Brake Activated Release before Driving - Sounds
        TVD System Malfunction Visit Your Dealer Illuminates Sounds
        TVD System Overheated Reduce Engine Speed and Load Illuminates Sounds
        Drive-Start Control Malfunction Visit Your Dealer Illuminates Sounds
        Brake Override Malfunction Visit Your Dealer Illuminates Sounds
        12 Key Battery Low Illuminates Sounds
        Engine Oil Level Low Add or Replace - -
        Headlight System Malfunction Visit Your Dealer Illuminates Sounds
        Check RSA System*7 Illuminates Sounds
        Brake Pad Wear Visit Your Dealer Illuminates Sounds
        Accelerator and Brake Pedals Depressed Simultaneously Blinks -
        Tire pressure indicator (image display)*8 - -
        13 Windshield Washer Fluid Low - -
        Fuel Low - -
        Roads May Be Icy Drive with Care - Sounds
        Maintenance Required Soon*9 - -
        Injector Maintenance Required Soon*10 Illuminates -
        Maintenance Required Visit Your Dealer*9 - -
        Injector Maintenance Required Visit Your Dealer*10 Illuminates -
        To Activate Auto High Beam, Switch Headlights to High Beam*11 - -
        To Activate AHS, Switch Headlights to High Beam*12 - -
        POWER ON - -
        Depress Brake and Then Start Engine - -
        VSC Turned Off Pre-Crash Brake System Unavailable*1 - -
        Pre-Crash Safety Unavailable*1 - -
        High Power Consumption Partial Limit On AC/Heater Operation Blinks -
        Pre-Crash Safety Unavailable Clean Sensor*1 - -
        Pre-Crash Safety Off*1 - -
        Theft Sensor Turned Off*13 - -
        Theft Sensor Turned On*13 - -
        Automatic Mode On Shift Operation Sets or Releases Parking Brake - Sounds
        Automatic Mode Off - Sounds

        *1: Models with lexus safety system +

        *2: If the vehicle has reached a speed of 5 km/h (3 mph)

        *3: Models with lexus parking assist-sensor system

        *4: Models for G.C.C countries

        *5: Models with blind spot monitor system

        *6: Models with sliding roof system

        *7: Models with road sign assist system

        *8: Models with tire inflation pressure display function

        *9: Destination packages for South Korea

        *10: Models with injector maintenance required reminder function

        *11: Models with automatic high beam system

        *12: Models with adaptive high-beam system

        *13: Models with intrusion sensor

  2. OPERATION


    1. Eco Driving Indicator Light


      1. Eco driving indicator light can operate when all of the following conditions are met:


        • The engine switch is on (IG) and the engine is running.

        • The vehicle is being driven with the shift lever in D.

        • NORMAL mode or ECO mode is selected.

        • The shift paddle switch (transmission shift switch assembly) is not operated.

        • The vehicle is at a speed of 130 km/h (81 mph) or below.

    2. Lap Timer Function


      1. A lap time can be measured by operating the steering pad switch assembly.

      2. The lap time currently being measured and the most recent lap time are displayed on the tachometer, and the total time since the timer was started, each lap time and the fastest lap time are displayed on the multi-information display.

      3. While the timer is operating, the multi-information display can be changed to any display of the "F" information tabs. When the timer is stopped, the display will return to the lap timer display.

        B002ATVC01
        *1 Steering Pad Switch Assembly - -
        *a ENTER Switch *b RIGHT Switch
        *c Start (press ENTER switch) *d Lap (press RIGHT switch)
        *e Stop (press ENTER switch) *f Save (press and hold ENTER switch)
        *g Total Time *h Fastest Lap Mark
        *i Current Lap *j Most Recent Lap Time
        *k The illustrations shown are examples only. - -

    3. Lap Time History Function


      1. The lap time history can be displayed.

        B002AT9C01
        *1 Steering Pad Switch Assembly - -
        *a ENTER Switch *b UP Switch
        *c RIGHT Switch *d DOWN Switch
        *e BACK Switch *f Total Time
        *g Fastest Lap Time *h Lap Time List
        *i Press ENTER switch *j Press BACK switch
        *k Press UP switch *l Press DOWN switch
        *m Press and hold ENTER switch *n The illustrations shown are examples only.

    4. Torque Distribution Display Function


      1. The amount of torque distributed to the left and right rear wheels can be displayed.

        B002ATRC01
        *1 Steering Pad Switch Assembly - -
        *a ENTER Switch *b BACK Switch
        *c Torque distribution display on the multi-information display *d Left rear torque amount
        *e Right rear torque amount *f Torque distribution display on the tachometer
        *g The illustrations shown are examples only. - -
        B002AUN ENTER switch operation B002AQQ BACK switch operation

      2. On the torque distribution display on the tachometer, the difference between the torque applied to the left and right rear wheels is displayed.

        B002AVCC01
        *a Rear right torque is large *b Rear left torque is large
        *c No difference between rear left and right *d Torque distribution display on the multi-information display
        *e Torque distribution display on the tachometer *f The illustrations shown are examples only.
        B002AUN Difference - -

      3. A torque peak hold function is provided. If more than 4 segments are illuminated, the maximum segment position is indicated using the yellow frame for 3 seconds.

        B002AWHC01
        *a Torque distribution display on the multi-information display *b Torque distribution peak hold display
        *c The illustration shown is an example only. - -

    5. G-force


      1. Longitudinal and lateral G-force applied to the vehicle can be displayed.

      2. By pressing the ENTER switch of the steering pad switch assembly, the G-force is displayed on the tachometer. Additionally, the trace of the maximum G-force is displayed on the multi-information display. This trace can be reset by pressing and holding the ENTER switch.

        B002ARAC01
        *1 Steering Pad Switch Assembly - -
        *a ENTER Switch *b BACK Switch
        *c G-force display on the multi-information display *d G-force of the vehicle
        *e Steering wheel position *f Current G-force value
        *g Accelerator pedal input *h Brake fluid pressure
        *i Record of the maximum G-forces *j Track value of the maximum G-force since display reset
        *k G-force display on the tachometer *l G-force direction
        *m The illustration shown is an example only. - -
        B002AUN ENTER switch operation B002AQQ BACK switch operation

        Tech Tips


        • During engine warm-up, steering wheel position, accelerator pedal input and brake fluid pressure are not displayed.

        • This display is intended for use as a guideline. Depending on factors such as the road surface condition, temperature and vehicle speed, the display may not show the actual condition of the vehicle.

    6. Vehicle Monitor


      1. The tire pressure indicator* can be displayed.

        *: Models with tire inflation pressure display function

        B002ASOC01
        *a Tire pressure indicator *b The illustrations shown are examples only.