CHARGING SYSTEM


  1. CONSTRUCTION


    1. Generator Pulley with Clutch


      1. A one-way clutch is used on the generator pulley in order to reduce the load that acts on the auxiliary equipment belt.

        A01QE01C01
        *1 Clutch *2 Outer Wheel
        *3 Inner Wheel - -
        *a Generator Pulley Cross Section - -

    2. Stator Coil


      1. The joined segment method is used for the stator coil. In this method, segment conductors are inserted and welded together to form the stator. This enables a smaller body, yet higher output, and higher efficiency. By providing a mesh ventilation gap between the coil ends, the coil end inner circumference surfaces that receive the cool wind are smoothened to allow wind to flow smoothly, improving cooling performance and reducing the sound of the wind.

        A01QDK8C02
        *1 Stator *2 Segment
        *3 Stator Core - -
        *a Twisting *b Joint
        *c Ventilation Gap *d Joined Segment Method