FRONT BRAKE


  1. CONSTRUCTION


    1. The ventilated disc rotor has curved vanes, ensuring excellent cooling performance.

    2. Slots are provided on the surface of the disc rotor, ensuring stable stopping performance and high fade resistance.

      A01QDM4C01
      *a Curved Vanes *b Slot

      Tech Tips


      • The usability of a brake disc is judged based on its thickness. The minimum values are marked on the hat and outer periphery of the brake disc.

      • When replacing a brake disc, since the parts are different for the RH side and LH side, make sure that the correct brake disc is installed.

        A01QDN4C01
        *a Position of Abrasion Limit Value and RH/LH Identification Character "RIGHT" or "LEFT" *b Position of Abrasion Limit Value
        *c Position of RH/LH Identification Character "RIGHT" or "LEFT" - -

      • If any crack on the disc rotor is 46 mm (1.81 in.) or longer, or reaches the outer or inner edge, the disc needs to be replaced.

        A01QDD4C01
        *a Crack reaches outer or inner edge *b Crack on disc rotor is 46 mm (1.81 in.) or longer