FRONT SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. A light, hollow type front stabilizer bar is used.

    2. Through the use of an enlarged stabilizer bar and the optimization of the stabilizer layout, resistance to vehicle roll while turning has been enhanced.

    3. Due to the Teflon liner coating and fluoro polymer coating to the sliding surface of the stabilizer bar, the friction against the stabilizer bar is reduced.

      A01QE02C04
      *1 Front Stabilizer Bar *2 Front Stabilizer Link Sub-assembly
      *a Cross Section of Front Stabilizer Bar Bushing *b Teflon Liner and Fluoro Polymer Coating