DIFFERENTIAL SYSTEM


  1. CONSTRUCTION


    1. A dual dampening construction, in which the differential is mounted to the suspension member via rubber mounts, is used.

    2. The rear differential is supported by the suspension member at 4 points: 2 at the front and 2 at the rear.

    3. A liquid-filled differential mount is used for the rear right mount to reduce vibration and noise.

    4. The sleeve of the front mount is made of aluminum. The upper stopper of the front mount is also made of aluminum to reduce weight.

      A01QDBSC01
      *a A - A Cross Section *b B - B Cross Section
      *c C - C Cross Section - -
      B002ARR Liquid (Non-freezing) A01QDI4 Mount Rubber