DYNAMIC RADAR CRUISE CONTROL SYSTEM


  1. CONSTRUCTION


    1. The cruise control main switch consists of the ON-OFF button and the +RES, -SET and CANCEL switches. The +RES, -SET and CANCEL switches are operated by moving the lever in the 3 directions indicated.

    2. When the cruise control system is turned on using the ON-OFF button, the system starts in vehicle-to-vehicle distance control mode. When the ON-OFF button is pressed and held for approximately 1.5 seconds or more, the system changes to constant speed control mode.

    3. The switches in the cruise control main switch are of the automatic reset (normally open) type that turn on only when the switch is being operated and turn off as soon as the driver releases the switch. Furthermore, the functions of the switches are active only when the cruise control system has been turned on using the ON-OFF button on the cruise control main switch.

      A01QDJKC01
      *1 Cruise Control Main Switch *2 Distance Control Switch
      *a +RES Switch *b CANCEL Switch
      *c -SET Switch *d ON-OFF Button

    4. While the vehicle is being driven in vehicle-to-vehicle distance control mode, the vehicle-to-vehicle distance setting changes as follows each time the distance control switch is pressed: long → middle → short.

    5. If the engine switch is turned off and back on (IG), the system will default to "long".

    6. The vehicle-to-vehicle distance is as follows:

      Stage Vehicle-to-vehicle Distance*
      Long Approximately 50 m (160 ft.)
      Middle Approximately 40 m (130 ft.)
      Short Approximately 30 m (100 ft.)

      Tech Tips

      *: While driving at a speed of 80 km/h (50 mph).