БЛОК ДВИГАТЕЛЯ


  1. CONSTRUCTION


    1. The cylinder head sub-assembly is made of aluminum alloy.

    2. The injector is located in the center of the combustion chamber in order to improve engine performance and achieve cleaner emissions.

    3. A glow plug assembly is placed between the intake ports of each cylinder to ensure startability.

    4. A passage for the Exhaust Gas Recirculation (EGR) is provided in the cylinder head sub-assembly. By cooling the exhaust gas, a large amount of exhaust gas is able to recirculate.

    5. A water jacket is provided for the intake and exhaust ports respectively to achieve excellent cooling performance.

      A01QEZYC01
      *1 Glow Plug Assembly *2 Injector Assembly
      *a Intake Port *b Exhaust Port
      *c Water Jacket - -

    6. A hole for installing the exhaust fuel addition injector assembly is located on the No. 4 exhaust port of the cylinder head sub-assembly.

      A01QFGSE02
      *1 Hole for Installing Exhaust Fuel Addition Injector Assembly
      *2 Front
      *3 View from A