AIR CONDITIONING SYSTEM


  1. CONSTRUCTION


    1. A Revolutionary super-slim Structure (RS) type No. 1 cooler evaporator sub-assembly is used.

    2. By placing the tanks at the top and the bottom of the No. 1 cooler evaporator sub-assembly and by using a micropore tube construction, the following effects have been achieved:


      • Heat exchanging efficiency is ensured.

      • Temperature distribution is made uniform.

      • The No. 1 cooler evaporator sub-assembly is made thinner.

    3. The internal path of the No. 1 cooler evaporator sub-assembly where refrigerant flows through has been optimized to reduce the refrigerant pressure loss, enhancing the performance and downsizing the evaporator.

      A00XR59