PRE-CRASH SAFETY SYSTEM


  1. OPERATION


    1. Pre-crash System Cancel Switch Assembly


      1. A pre-crash system cancel switch assembly is provided to disable the system. When pressed and held for approximately 3 seconds, the pre-crash safety system will be disabled. A message will be displayed for 6 seconds and the pre-crash warning light will be illuminated. When the switch is pressed again while the system is disabled, the system will be reenabled.

      2. The switch is also used to change the warning timing in 3 levels: far, middle, near. The warning timing changes in the order below each time the switch is pressed.

        Figure 1. Select of Warning Timing

        A01KDZUE01