METER / GAUGE SYSTEM


  1. FUNCTION


    1. Buzzer Function


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 Simple Intelligent Parking Assist Indication Pattern 1 (Once)*1
        2 Simple Intelligent Parking Assist Indication Pattern Indicate (Twice)*1
        3 Simple Intelligent Parking Assist Indication Pattern 2 (Once)*1
        4 Shift By Wire Second Mode
        5 READY
        6 Turn Signal/Hazard Warning Operation
        7 Entry and Start System Warning (Once)
        8 Immobiliser Certification Reminder
        9 Light Reminder
        10 Shift Position P Request
        11 Front Seat Belt Warning (Level 1) and Rear Seat Belt Warning
        12 EPS Warning
        13 Hybrid System Warning (Once)
        14 Hybrid Unit Overheat Warning
        15 Multi-information Display Warning
        16 VSC Warning
        17 Brake System Temperature High Warning
        18 Shift Reject
        19 Hill-start Assist Control Set Notice
        20 Entry and Start System Warning 1 (Intermittent)
        21 Shift Position R Indication
        22 Door Open when Shift Lever in P Warning
        23 Roof Sunshade Open Warning*2
        24 Front Seat Belt Warning (Level 2)
        25 Engine Oil Pressure Warning
        26 Door Open while Driving Warning
        27 Entry and Start System Warning 2 (Intermittent, maximum 9 times)
        28 HV Battery Low Warning (SOC: 25% or less)
        29 Hill-start Assist Control during Regular Control
        30 Hill-start Assist Control Reset Notice
        31 EV Drive Mode Reject Warning
        32 Road Sign Assist Indication*3
        33 Hybrid System Warning (Intermittent)
        34 Parking Brake Engaged Warning
        35 HV Battery Low Warning (SOC: 18% or less)
        36 Brake System Temperature Rise or Active Test
        37 Hill-start Assist Control Advance Notice of Ending
        38 Brake System Low Braking Force Warning
        39 Accelerator Depression in N Position
        40 Accelerator hold Warning
        41 Lane Departure Alert Warning*4

        *1: Models with TOYOTA parking assist-sensor system

        *2: Models with roof sunshade system

        *3: Models with road sign assist system

        *4: Models with pre-crash safety system

    2. Multi-information Display


      1. Display Function Flow


        • The multi-information display can be switched as shown in the flow chart below:

          A01KE54E01
          No. Display Change Condition
          *a Conditions are met.
          *b Conditions are not met.
          *c If there are multiple display requests, items will be displayed in sequence.
          *d An item or display is selected by operating the steering pad switch assembly.
          *e After power switch on (IG).
          *f The ending display is displayed for a certain period of time after the power switch is turned off.

      2. Display Tab Operation


        • The information currently displayed can be switched using the RIGHT/LEFT switch on the steering pad switch assembly.

          A01KE6VC01
          *A Models with Multimedia System *B Models with Pre-crash Safety System
          *1 Steering Pad Switch Assembly - -
          *a LEFT Switch *b RIGHT Switch
          *c Drive Information *d Navigation Information
          *e Audio Information *f Driving Assist System Information
          *g Warning Message *h Settings
          *i The illustrations shown are examples only. - -
          A01KE1Q RIGHT switch operation A01KE7Q LEFT switch operation

      3. Drive Information Mode Function


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

        • The drive information display can be switched by using the UP/DOWN switch on the steering pad switch assembly.

          A01KDURC01
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f Energy Monitor
          *g Digital Vehicle Speed *h Blank
          *i The illustrations shown are examples only. - -
          A01KE1Q DOWN switch operation A01KE7Q UP switch operation

      4. Setting Function


        • The items displayed on the multi-information display can be customized.

        • The following items can be selected on the information setting screen.

          Item Available Setting
          Lane Departure Alert Sensitivity*1 Select to adjust lane departure alert sensitivity.
          TOYOTA Parking Assist-sensor*2 Select to activate/deactivate TOYOTA parking assist-sensor system.
          Road Sign Assist*3 Select to activate/deactivate road sign assist system.
          Instrument panel light Select to adjust brightness of the instrument panel light.
          Road Sign Assist Setup*3

          • Notification Method

            Select to change the notification method of the following warnings between No Notification, Only Visual and Visual and Audible:


            • Excess Speed

              Warns the driver if the vehicle exceeds the speed on the speed limit sign displayed on the multi-information display.

            • Others

              Warns the driver if the system determines that the vehicle is overtaking when a no overtaking sign is displayed on the multi-information display.


          • Notification Level

            Select to set the speed threshold over which the excess speed warning starts to operate when a speed limit sign is displayed on the multi-information display.
          Unit

          The unit displayed on the multi-information display can be selected:


          • km (km/L) (Default)

          • km (L/100 km)

          • miles (MPG)

          The unit displayed on the multi-information display can be selected:


          • °C (Celsius) (Default)

          • °F (Fahrenheit)
          EV Display

          The EV driving indicator light can be switched:


          • Yes (Default)

          • No
          Drive Information 1

          2 items can be selected among the following:


          • Current Fuel Consumption (Bar Display) (Default of upper area)

          • Current Fuel Consumption (Value Display)

          • Total Average Fuel Consumption between Rest Operations (Default of lower area)

          • Average Fuel Consumption after Engine Start-up

          • Average Fuel Consumption after Refueling

          • Total Average Vehicle Speed between Reset Operations

          • Average Vehicle Speed after Engine Start-up

          • Total Elapsed Time between Reset Operations

          • Elapsed Time after Engine Start-up

          • Cruising Range

          • Cruising Range after Engine Start-up

          • Blank
          Drive Information 2

          2 items can be selected among the following:


          • Current Fuel Consumption (Bar Display)

          • Current Fuel Consumption (Value Display)

          • Total Average Fuel Consumption between Rest Operations

          • Average Fuel Consumption after Engine Start-up

          • Average Fuel Consumption after Refueling

          • Total Average Vehicle Speed between Reset Operations (Default of lower area)

          • Average Vehicle Speed after Engine Start-up

          • Total Elapsed Time between Reset Operations

          • Elapsed Time after Engine Start-up

          • Cruising Range (Default of upper area)

          • Cruising Range after Engine Start-up

          • Blank
          Drive Information 3

          2 items can be selected among the following:


          • Current Fuel Consumption (Bar Display)

          • Current Fuel Consumption (Value Display)

          • Total Average Fuel Consumption between Rest Operations

          • Average Fuel Consumption after Engine Start-up (Default of upper area)

          • Average Fuel Consumption after Refueling

          • Total Average Vehicle Speed between Reset Operations

          • Average Vehicle Speed after Engine Start-up

          • Total Elapsed Time between Reset Operations

          • Elapsed Time after Engine Start-up

          • Cruising Range

          • Cruising Range after Engine Start-up (Default of lower area)

          • Blank
          Pop-up Display

          The following displays that appear as soon as the set conditions are met can be switched to On (default) or Off:


          • Incoming Telephone Display*4

          • Turn-by-turn Navigation Display*5
          Initialization The set items can be initialized.
          Language

          The language used on the multi-information display can be selected:


          • English (Default)

          • German

          • French

          • Spanish

          • Italian

          • Portuguese

          • Dutch

          • Swedish

          • Norwegian

          • Danish

          • Russian

          • Finnish

          • Greek

          • Polish

          • Ukrainian

          • Turkish

          • Hungarian

          • Czech

          • Slovak

          • Romanian

          *1: Models with pre-crash safety system

          *2: Models with TOYOTA parking assist-sensor system

          *3: Models with road sign assist system

          *4: Models with Bluetooth hands-free system

          *5: Models with multimedia system

      5. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the display in the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 MAINTENANCE MODE - -
        CERTIFICATION MODE - -
        ADJUSTING FRONT CAMERA*1 - -
        BRAKE!*1 - -
        Pre-crash safety symbol (image display)*1 - -
        2 Lane departure alert warning reminder indicator (image display)*1 - -
        Pre-crash warning reminder indicator (image display)*1 - -
        Brake effectiveness is reduced due to failure, please stop in a safe area and check manual. - -
        Shift to P before exiting vehicle. Blinks Sounds
        3 IPA cancelled, take over, check IPA system.*2 - Sounds
        IPA cancelled, take over.*2 - Sounds
        IPA slot not detected, speed too high. *2 - Sounds
        IPA cancelled, take over, speed too high. *2 - Sounds
        IPA cancelled, take over, driver intervened. *2 - Sounds
        IPA cancelled, take over, TRC/VSC is off. *2 - Sounds
        IPA cancelled, take over, TRC/ABS/VSC activated. *2 - Sounds
        IPA cancelled, take over, timeout. *2 - Sounds
        IPA not available, speed too high. *2 - Sounds
        IPA not available, TRC/VSC is off. *2 - Sounds
        Check IPA system. *2 - Sounds
        IPA not available. *2 - Sounds
        IPA not available, stop the vehicle, turn wheel from left end to right end. *2 - Sounds
        Memory error. *2 - Sounds
        Write zero-point of steering angle. *2 - Sounds
        Write maximum steering angle. *2 - Sounds
        End of adjustment. *2 - Sounds
        4 Door open (while driving) (image display)*3 Blinks Sounds
        Door open (image display) - -
        Clearance sonar detection (image display)*2 - -
        Check sonar system.*2 Illuminates Sounds
        Clean sonar.*2 Illuminates Sounds
        IPA control indicator (image display)*2 - Sounds
        Check surroundings.*2 - Sounds
        IPA finished, take over.*2 - Sounds
        5 Auto power off to conserve battery. - -
        6 Shift to P position. Blinks Sounds
        Shift is in N. Release accelerator before shifting. Blinks Sounds
        Press brake when vehicle is stopped. Hybrid system may overheat. Blinks Sounds
        Hybrid battery low. Hybrid system stopped. Shift to P and restart. Blinks Sounds
        7 Hybrid system malfunction. Stop in a safe place. See owner's manual. Illuminates Sounds
        Hybrid battery low. Shift out of N to recharge. Blinks Sounds
        Release parking brake. Blinks Sounds
        Key not detected. Blinks Sounds
        8 Engine coolant temperature hot warning symbol (image display) - Sounds
        P lock malfunction. When parking, park in flat place and apply parking brake securely. Illuminates Sounds
        Shift system failure. When parking, apply parking brake. Read owner's manual. Illuminates Sounds
        Shift system comm. failure. When parking, apply parking brake. Read owner's manual. Illuminates Sounds
        12-volt battery low. When parking, apply parking brake. Read Owner's Manual. Illuminates Sounds
        Shift system failure. Read Owner's Manual. Illuminates Sounds
        12-volt battery low. Shifting unavailable. Read Owner's Manual. Blinks Sounds
        Shifting temporarily unavailable. Wait a moment and try again. Blinks Sounds
        Can not shift to B. Shift to D once to shift to B. Blinks Sounds
        Can not shift to D or R. Shift after hybrid system starts. Blinks Sounds
        Shifting unavailable. Press brake pedal before shifting. Blinks Sounds
        Switched to N. Shift to D once to shift to B. Blinks Sounds
        Switched to N. To shift to D, stop car first. Blinks Sounds
        Switched to N. To shift to R, stop car first. Blinks Sounds
        Switched to N. To engage P mode, stop car then press P switch. Blinks Sounds
        Check charging system. Illuminates -
        Check entry & start system. Blinks Sounds
        Check cruise control system. Illuminates Sounds
        Check LDA system.*1 Illuminates Sounds
        LDA not available.*1 Illuminates Sounds
        Check Pre-Crash Safety.*1 Illuminates Sounds
        Engine oil pressure low. Illuminates Sounds
        Check brake system. Illuminates Sounds
        Check RSA system.*4 Illuminates Sounds
        Low 12V sub battery level. - -
        LDA system is unavailable below approx. 50km/h.*1 - -
        LDA System is unavailable below approx. 32MPH.*1 - -
        LDA System is unavailable at this speed.*1 - -
        9 Lane departure alert indicator (image display)*1 - -
        Turn power OFF. Blinks Sounds
        Key detected in vehicle. Blinks Sounds
        Turn lights OFF. Blinks Sounds
        Moon roof open.*5 Blinks Sounds
        Depress brake pedal, touch POWER switch with key. Blinks Sounds
        Depress brake pedal and push POWER switch to start. Blinks Sounds
        Shift to P position to start. Blinks Sounds
        10 Steering lock active. Blinks Sounds
        Shift to P position to start. Blinks Sounds
        11 Key battery low. Illuminates Sounds
        Hybrid system overheated. Reduced output power. Illuminates Sounds
        Headlight system malfunction. Visit your dealer.*6 Illuminates Sounds
        12 CHECKING PRE-CRASH BRAKE*1 - -
        TRC OFF - -
        Maintenance required for hybrid battery cooling parts at your dealer. - -
        Power ON. - -
        Pre-Crash Brake is disabled due to VSC OFF.*1 - -
        Pre-Crash Safety temporarily not available.*1 - -
        Front sensor systems are temporarily unavailable due to inappropriate temp. Wait a moment.*1 - -
        Front sensor systems are temporarily unavailable due to blocked vision. Clean windshield. - -
        EV mode currently not available. - Sounds
        EV mode not available. Warming up. - Sounds
        EV mode not available low battery. - Sounds
        EV mode not available. Excessive speed. - Sounds
        EV mode not available. Excessive acceleration. - Sounds
        EV mode deactivated. - Sounds
        EV mode deactivated. Low battery. - Sounds
        EV mode deactivated. Excessive speed. - Sounds
        EV mode deactivated. Excessive acceleration. - Sounds
        Pre-Crash Safety OFF.*1 - -
        Pre-Crash Safety alert.*1 - -

        *1: Models with pre-crash safety system

        *2: Models with TOYOTA parking assist-sensor system

        *3: If the vehicle has reached a speed of 5 km/h (3 mph)

        *4: Models with road sign assist system

        *5: Models with roof sunshade system

        *6: Models with automatic high beam system, automatic headlight leveling system or LED headlights

  2. OPERATION


    1. Hybrid System Indicator


      1. The Hybrid System Indicator will begin to operate when both of the following conditions are met:


        • The hybrid system is operating (the READY indicator light is illuminated).

        • Shift position is not in P, N or R.