BRAKE CONTROL SYSTEM


  1. CONSTRUCTION


    1. A non-contact type brake pedal stroke sensor assembly is used.

    2. This sensor detects the extent of the brake pedal stroke and transmits it to the skid control ECU.

      A00Z0B2E06

      Tech Tips


      • To install a brake pedal stroke sensor assembly, which is available as a service part, perform as follows:


        • The sensor lever is secured with a pin to "0" stroke. (Do not detach the pin until the installation has been completed.)

        • In this state, install the sensor on the brake pedal (in the OFF state) on the vehicle.

        • After completing the installation, firmly press the brake pedal once to break off the pin that is securing the sensor in place.

        • Make sure the broken pin does not remain in the sensor lever.

      • After replacing the brake pedal stroke sensor assembly, initialization of brake pedal stroke sensor assembly must be required on the skid control ECU side. For Details, refer to the Repair Manual.