FEATURES


  1. OUTLINE


    1. TOYOTA Hybrid System-II (THS-II)


      1. This system optimally performs cooperative control of the 2ZR-FXE engine, and Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2) in the P410 hybrid vehicle transaxle assembly that provides excellent transmission performance. Furthermore, this system uses a high-output HV battery with a nominal voltage of DC 201.6 V, and a variable voltage system in which a boost converter boosts the operating voltage of the system to a maximum voltage of DC 650 V.

        A00YZZGC01
        *1 2ZR-FXE Engine *2

        P410 Hybrid Vehicle Transaxle Assembly

        - Motor Generator No. 1 (MG1)

        - Motor Generator No. 2 (MG2)
        *3

        Inverter with Converter Assembly

        - Inverter

        - Boost Converter

        - DC-DC Converter

        		 *4 HV Battery Assembly
        *5 Auxiliary Battery - -
        System Performance
        Maximum System Output* kW 100

        *: Maximum system output is engine output and MG2 output controlled by THS-II. MG2 output depends on power supplied by the HV battery.

    2. 2ZR-FXE Engine


      1. The 2ZR-FXE is an in-line 4-cylinder, 1.8-liter, 16-valve DOHC engine.

      2. This engine uses a high-expansion ratio Atkinson cycle, Variable Valve Timing-intelligent (VVT-i) system, Electric Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. In addition, use of an electric engine water pump assembly has eliminated the V-ribbed belt. Thus, improved engine performance, quietness, fuel economy, and cleaner emissions have been achieved.

        A00Z020
        Item Specification
        No. of Cyls. and Arrangement 4-cylinder, In-line
        Valve Mechanism 16-valve, DOHC with VVT-i
        Fuel System SFI
        Displacement

        cm3(cu. in.)

        		 1798 (109.7)
        Max. Output (EEC) kW@rpm 73@5200
        Max. Torque (EEC) N*m@rpm 142@2800 to 4400

    3. P410 Hybrid Vehicle Transaxle Assembly


      1. The P410 hybrid vehicle transaxle assembly contains Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2).

        A00Z0C2C01
        *1 Motor Generator No. 1 (MG1) *2 Motor Generator No. 2 (MG2)
        Item Specification
        Motor Generator No. 1 (MG1) Motor Generator No. 2 (MG2)
        Type Permanent Magnet Motor Permanent Magnet Motor
        Function Generate Electricity, Engine Starter Generate Electricity, Drive Wheels
        Cooling System Water-cooled Air-cooled
        Maximum Output kW - 60
        Maximum Torque N*m - 207

    4. Suspension


      1. A MacPherson strut type independent suspension is used for the front.

      2. A double wishbone type independent suspension is used for the rear.

        A00Z07M

    5. Steering


      1. The Electric Power Steering (EPS) system uses a power steering motor, a power steering torque sensor and a reduction mechanism that are built into the steering column assembly to generate assist torque, in order to assist the driver's steering effort.

        A00Z03PC01
        *A LHD Models *B RHD Models

    6. Brake

      Item Specification
      Front Brake Type Ventilated Disc
      Rotor Size (D X T)*1 mm (in.)

      277 X 26 (10.91 X 1.02)*2

      296 X 28 (11.65 X 1.10)*3
      Rear Brake Type Solid Disc
      Rotor Size (D X T)*1 mm (in.) 270 X 10 (10.63 X 0.39)
      Brake Control System ABS with EBD, Brake Assist, TRC, VSC+ and Hill-start Assist Control

      *1: Diameter X Thickness

      *2: Models with 15-inch Aluminum Wheel

      *3: Except Models with 15-inch Aluminum Wheel