ТОПЛИВНАЯ СИСТЕМА


  1. CONSTRUCTION


    1. A multiplex layered plastic fuel tank assembly is used for weight reduction. This fuel tank consists of 6 layers of 4 types of materials.

    2. A drain mark is provided at the lowest position of the fuel tank assembly. When dismantling (scrapping) the vehicle, drain fuel by drilling a hole at the drain mark.

      A00XRU9C01
      *1 Fuel Drain Mark *2 High Density Polyethylene (HDPE)
      *3 Regrind Material *4 Adhesive
      *5 Ethylene Vinyl Alcohol Copolymer (EVOH) - -
      *a Fuel Tank Wall Cross Section *b Fuel Tank Assembly Outside
      *c Fuel Tank Assembly Inside - -