БЛОК ДВИГАТЕЛЯ


  1. CONSTRUCTION


    1. A crankshaft made of forged steel, which excels in rigidity and wear resistance, is used.

    2. The crankshaft has 5 journals, 4 crank pins and 8 balance weights.

      A00XRIFC02
      *1 Oil Hole *2 Balance Weight
      *3 No. 1 Journal *4 No.5 Journal
      *a Engine Front - -

    3. On models with the stop and start system, high-strength crankshaft bearings are used.

      A00XRRAC01
      *1 Crankshaft Bearing (Upper Bearing) *2 Crankshaft Bearing (Upper Bearing)