METER / GAUGE SYSTEM


  1. FUNCTION


    1. Buzzer Function


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        1 Simple-intelligent Parking Assist Indication Pattern 1 (Once)*1 2 Simple-intelligent Parking Assist Indication (Twice)*1
        3 Simple-intelligent Parking Assist Indication Pattern 2 (Once)*1 4 Shift Position R Indication*2
        5 Stop and Start System Warning (Continuous)*3 6 Front Seat Belt Warning (Level 2)
        7 Rear Seat Belt Warning 8 Front Seat Belt Warning (Level 1)
        9 EPS Warning 10 Multi-mode Manual Transaxle Warning 2*2
        11 Multi-mode Manual Transaxle Warning 1*2 12 Entry and Start System Warning (Continuous)*4
        13 Entry and Start System Warning (Intermittent)*4 14 Key Reminder*5
        15 Door Open with Shift Lever D Warning*2 16 Multi-mode Manual Transaxle Active Test*2
        17 Hill-start Assist Control Reset Indication*6 18 Hill-start Assist Control Set Indication*6
        19 Entry and Start System Warning (Intermittent, Maximum 9 Times)*4 20 Entry and Start System Warning (Once)*4
        21 Multi-information Display Warning*7 22 Immobiliser Certification Reminder*4
        23 Parking Brake Engaged Warning 24 Door Open while Driving Warning
        25 M Mode Operation Reject Warning*8 26 Shift Reject Buzzer*2, *8
        27 Light Reminder 28 Turn Signal/Hazard Warning Operation

        *1: Models with simple-intelligent parking assist system

        *2: Models with multi-mode manual transaxle

        *3: Models with stop and start system

        *4: Models with entry and start system

        *5: Models without entry and start system

        *6: Models with Hill-start Assist Control system

        *7: Models with dot LCD type multi-information display

        *8: Models with multidrive/continuously variable transaxle

    2. Multi-information Display


      1. Display Function Flow (Models with Dot LCD Type Multi-information Display)

        Figure 1. The multi-information display flow can be switched as shown in the flow chart below:

        A00XRLME07
        No. Transition Condition
        *1 Conditions are not met and all new messages have been displayed.
        *2 If the display conditions for 2 or more messages are met, relevant messages are alternately displayed for 2 seconds each.
        *3 If the ignition switch is turned off during the "Opening" display, the "Opening" display will be shown from the beginning.
        *4 If the DISP switch is used to change from an advisory message to the cruise information display screen, repeatedly operating the DISP switch will cycle through the cruise information screens and then return the advisory message if the display conditions are still met.
        *5 If the DISP switch is not operated for more than 6 seconds with any of the caution or warning message display conditions still met, the relevant caution or warning messages are displayed.

      2. Cruise Information Mode Function


        • The cruise information on a segment LCD type multi-information display is displayed in the following order each time the ODO/TRIP DISP switch is pressed.

          A00XRUSC01
          *A Models with Manual Transaxle or Multi-mode Manual Transaxle *B Models with Multidrive/Continuously Variable Transaxle
          *1 Odometer *2 Trip Meter A
          *3 Trip Meter B *4 Stop and Start Operation Time after Engine Start-up
          *5 Total Stop and Start Operation Time *6 Average Fuel Consumption/Eco Drive Indicator Zone Display
          *7 Cruising Range *8 Meter Panel Luminance Adjustment
          *a When the taillights are on - -
          A00XREL ODO/TRIP DISP switch pressed briefly - -

        • The cruise information of the dot LCD type multi-information display is displayed in the following order each time the DISP switch is pressed.

          A00XRAJC02
          *A Models with Manual Transaxle or Multi-mode Manual Transaxle - -
          *1 Average Fuel Consumption/Instantaneous Fuel Consumption *2 Cruising Range
          *3 Average Vehicle Speed After Engine Start-up *4 Driving Time after Engine Start-up
          *5 Setting *6 Average Fuel Consumption/Eco Driving Indicator Zone Display
          A00XREL DISP switch pressed briefly - -

      3. Customization Function


        • On models with the segment LCD type multi-information display, pressing and holding the ODO/TRIP DISP switch when the odometer is displayed changes the display to Eco Driving Indicator Light customization display.

          A00XR97C01
          A00XRCH ODO/TRIP DISP switch pressed and held A00XREL ODO/TRIP DISP switch pressed briefly

        • On models with the dot LCD type multi-information display, pressing and holding the DISP switch when the setting screen for cruise information is displayed changes the display to the customization screen for the displayed language, units used for the fuel consumption display and Eco Driving Indicator Light*.

          *: Models with multidrive/continuously variable transaxle

          A00XRG9C01
          A00XRCH DISP switch pressed and held A00XREL DISP switch pressed briefly

        • In settings mode, the following items of the combination meter assembly can be customized.

          Item Available Setting
          Language

          • English

          • French

          • German

          • Spanish

          • Italian

          • Russian*1

          • Turkish*2

          • Portuguese
          Unit

          • km (km/L)

          • km (L/100 km)

          • miles
          Eco Driving Indicator Light*3

          • On

          • Off

        *1: Except destination package for Turkey

        *2: Destination package for Turkey

        *3: Models with multidrive/continuously variable transaxle

      4. Warning Mode Function (Dot LCD Type Multi-information Display)


        • When a warning is necessary, the warning display interrupts the display in the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 Door Open Warning (While Driving) - Sounds
        Door Open Warning (While Stopped) - -
        2 IPA CANCELED, TAKE OVER, CHECK IPA*1 - Sounds
        IPA CANCELED, TAKE OVER*1 - Sounds
        IPA SLOT NOT DETECTED, SPEED TOO HIGH*1 - Sounds
        IPA CANCELED, TAKE OVER, SPEED TOO HIGH*1 - Sounds
        IPA CANCELED, TAKE OVER, DRIVER INTERVENED*1 - Sounds
        IPA CANCELED, TAKE OVER, TRC/VSC IS OFF*1 - Sounds
        IPA CANCELED, TAKE OVER, TRC/ABS/VSC ACTIVATED*1 - Sounds
        IPA CANCELED, TAKE OVER, TIMEOUT*1 - Sounds
        IPA NOT AVAILABLE, SPEED TOO HIGH*1 - Sounds
        IPA NOT AVAILABLE, TRC/VSC IS OFF*1 - Sounds
        CHECK IPA*1 - Sounds
        IPA NOT AVAILABLE*1 - Sounds
        IPA NOT AVAILABLE, STOP THE VEHICLE, TURN WHEEL FROM LEFT END TO RIGHT END*1 - Sounds
        MEMORY ERROR*1 - Sounds
        WRITE ZERO-POINT OF STEERING ANGLE*1 - Sounds
        WRITE MAXIMUM STEERING ANGLE*1 - Sounds
        END OF ADJUSTMENT*1 - Sounds
        Clearance Sonar Obstruction Detection*2 -
        CHECK SONAR SYSTEM*2 Illuminates Sounds
        3 AUTO POWER OFF TO CONSERVE BATTERY - -
        4 SHIFT TO P POSITION Blinks Sounds
        5 RELEASE PARKING BRAKE Blinks Sounds
        KEY NOT DETECTED Blinks Sounds
        6 Charging System Warning - -
        Entry and Start System Warning*3 Blinks Sounds
        CHECK CRUISE CONTROL SYSTEM*4 Illuminates Sounds
        7 ENGINE OIL PRESSURE LOW - Sounds
        8 TURN POWER OFF Blinks Sounds
        KEY DETECTED IN VEHICLE Blinks Sounds
        TURN LIGHTS OFF Blinks Sounds
        MOON ROOF OPEN*5 Blinks Sounds
        9 DEPRESS BRAKE PEDAL, TOUCH ENGINE SWITCH WITH KEY*3 Blinks Sounds
        DEPRESS CLUTCH PEDAL, TOUCH ENGINE SWITCH WITH KEY*3, *6 Blinks Sounds
        DEPRESS BRAKE PEDAL AND PUSH ENGINE SWITCH TO START*3 Blinks Sounds
        DEPRESS CLUTCH PEDAL AND PUSH ENGINE SWITCH TO START*3, *6 Blinks Sounds
        SHIFT TO P POSITION TO START*3, *7 Blinks Sounds
        SHIFT TO N POSITION TO START*3, *8 Blinks Sounds
        10 STEERING LOCK ACTIVE*3 Blinks Sounds
        11 KEY BATTERY LOW*3 Illuminates Sounds
        DRAIN WATER FROM FUEL FILTER*9 Illuminates Sounds
        ENGINE OIL LOW Illuminates Sounds
        Check AHB System*10 Illuminates Sounds
        DPF FULL ENGINE SERVICE REQUIRED*9 Illuminates -
        12 LOW WASHER LIQUID - -
        OIL MAINTENANCE REQUIRED SOON - -
        OIL MAINTENANCE REQUIRED - -
        RESETTING OIL MAINTENANCE DATA - -
        RESETTING OIL MAINTENANCE DATA INCOMPLETE - -
        POWER ON*3 - -
        Engine start ready state*3 - -
        DPF FULL SEE OWNER'S MANUAL*9 - -
        DPF MANUAL REGENERATION IN PROCESS*9 - -

        *1: Models with simple-intelligent parking assist system

        *2: Models with TOYOTA parking assist-sensor system

        *3: Models with entry and start system

        *4: Models with cruise control system

        *5: Models with roof sunshade system

        *6: Models with manual transaxle

        *7: Models with multidrive/continuously variable transaxle

        *8: Models with multi-mode manual transaxle

        *9: Models with diesel engine

        *10: Models with automatic high beam system

  2. OPERATION


    1. Eco Driving Indicator Light and Eco Driving Indicator Zone Display


      1. Eco Driving Indicator Light can operate when all of the following conditions are met:


        • The ignition switch is ON and the engine is running.

        • The vehicle is being driven with the shift lever in D.

        • SPORT mode is not selected.

        • The vehicle is being driven at a speed of 130 km/h (81 mph) or less.

      2. The following table shows the operation of Eco Driving Indicator Light and Eco driving indicator zone display in different driving conditions:

        Driving Condition Eco Driving Indicator Light Eco Driving Indicator Zone Display
        While Stopped Turns off A00XRUB
        While Eco Driving Turns on A00XRIU
        While Non-Eco Driving Turns off A00XRIB

        When any of the following conditions is met, operation is stopped.


        • Shift lever is not in D.

        • SPORT mode is selected.

        • The vehicle is being driven at a speed of 130 km/h (81 mph) or higher.

        		 Turns off A00XRI4