NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM(except Sedan)


  1. FUNCTION


    1. Navigation Screen


      1. The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:

        - Map data in the navigation ECU

        - Global Positioning System (GPS) satellites

        - Built-in gyro sensor

        - Vehicle speed signal

        - Reverse signal

        - Parking brake signal

        - Radio Data System Traffic Message Channel (RDS-TMC) signal

      2. The functions of the navigation screen are listed below.

        Item Function
        Map Display Map Color Change Depending on the position of the light control switch, the screen changes today mode or night mode.
        Taillight-interlocked Map Color Change Changes the color of the map screen that is displayed when the taillights are turned on.
        North Up / Heading Up

        • If North Up is selected, regardless of the direction of vehicle travel, north is always up.

        • If Heading Up is selected, the direction of vehicle travel is always up.
        3D Display Displays a 3-dimensional (3D) view of the map.
        Multi-step Scale Display Changes the map scale in 14 steps.
        Street Name Indication on Scrolled Map Displays the street name and city name even when the map screen is being scrolled.
        Road Number Sign Board Display Displays the road number on the map.
        Point of Interest Display Displays selected types of points of interest as marks on the map.
        Route Guidance Demonstration Demonstrates the route guidance to the destination.
        Vehicle Icon Appears on the 3D display. The color can be changed among blue, red, yellow, green and purple.
        RDS-TMC Display Displays RDS-TMC icons, arrows and indicators when RDS-TMC service is being received.
        Route Trace It is possible to store up to the last 124 miles (200 km) of a traveled route and retrace the route on the display.
        Destination Search Preset Destination Memory Search Sets a pre-registered point as a destination point while driving.
        Address Search A destination can be set by entering a country, and town name / code name, and street / intersection name.
        Point of Interest Search

        A destination can be set in 2 ways:


        • The name of a POI can be entered and then searched for after selecting a search area. Search areas include defined areas (such as a user selected country, state and city), near the current position, near the main destination, or along the current route)

        • A POI category can be selected and searched for near the current position, in a defined area (such as a user selected country, state and city), near the main destination, or along the current route.
        Online Search Allows use of an internet search engine to set a destination using the most up to date information.
        Previous Destination Search Stores the coordinates, names, and date of up to 100 locations that have been set as destinations in the past.
        Map Search A destination can be set by scrolling the cursor on the map.
        Coordinate Search A destination can be input by entering its coordinates.
        Voice-recognition Search A destination can be set up by voice command input.
        Route Search Multiple Destination Setting Sets multiple destinations. It can also rearrange the sequence of the destinations.
        Multiple Route Search Searches for multiple routes.
        Search Condition Designation Searches for the fast, short, and ecological routes.
        Detour Search Changes the route to detour around a section of the route.
        Regulated Road Consideration Performs searches which consider regulated roads.
        Avoid Traffic Search Manually changes to another route to avoid heavy congestion.
        Guidance Voice Guidance Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
        Next Turn Guidance Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
        Distance-to-destination Display Displays the distance from the present location to the destination.
        Estimated Arrival Time Display Displays estimated arrival time.
        Others Voice Recognition Recognizes pre-programmed system commands spoken to operate the navigation system.

    2. Information Screen


      1. Information about fuel consumption per minute or per trip can be displayed on the vehicle information screen display.

      2. The fuel consumption screen is displayed as illustrated below. This screen has the display functions listed below.

        A01G2IUE01
        Item Outline
        (1) Clear Switch Clears all past information.
        (2) Average Speed Displays the value that has been calculated by the combination meter assembly, which is based on the distance driven and time elapsed since the ignition switch is turned to ON.
        (3) Elapsed Time Displays the value that has been calculated by the combination meter assembly, which is based on the time elapsed since the ignition switch is turned to ON.
        (4) Cruising Range Displays the approximate drivable distance.
        (5) Past Record Switch Changes to the past record (per trip) fuel consumption screen.
        (6) Average Per Minute Fuel Consumption

        • Displays the value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), provided that the ignition switch is ON.

        • Displays the average fuel consumption for the last minute, or since clear was last selected.
        (7) Current Per Minute Fuel Consumption Displays the instantaneous (current) fuel consumption value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), provided that the ignition switch is ON.
        (8) Update Switch

        • Restarts calculation of the average fuel consumption value.

        • Sends the average fuel consumption reset signal to the combination meter assembly to update the graph.
        (9) Trip Information Switch Changes to the average per minute fuel consumption screen.
        (10) Average Per Trip Fuel Consumption

        • Displays the current record and the last 5 average per trip fuel consumption records or the current record and those since clear was last selected.

        • Starts calculating the average fuel consumption when the average fuel consumption displayed on the combination meter assembly is reset.
        (11) Best Fuel Consumption Displays the best (most economical) per trip fuel consumption.

    3. Setup Screen


      1. The settings for the functions of the multi-display are available from the setup screen.

        Item Function
        Display Settings

        • Map Menu and Camera screen adjustment

        • Depending on the position of the headlight switch, the screen changes to day or night mode.
        General Setting

        • The language can be selected.

        • The beep sound can be turned off.

        • Automatic text scrolling can be turned off.

        • Registered information (personal data) can be cleared.

        • Distance unit can be changed.

        • The voice guidance volume can be adjusted or switched off.

        • Phone voice volume can be adjusted.

        • Ring volume can be adjusted.

        • Voice Dialog volume can be adjusted.

        • Data can be stored on a USB memory device.

        • Data can be copied from a USB memory device.

        • Time zones and the on/off settings of daylight saving time can be changed.
        Bluetooth Settings

        • The connection to a Bluetooth device can be turned on or off.

        • Connectable Bluetooth devices can be searched for.

        • The names of the Bluetooth devices that are currently connected or that are in the connection history can be displayed in a list. Additionally, availability information for each Bluetooth device is displayed.

        • PIN codes used for Bluetooth connection certification can be set.

        • A profile for connecting to the internet can be set.
        Phone Settings

        • The ring tone can be changed or turned off.

        • Message reception notification can be turned on or off.

        • E-mail reception notification can be turned on or off.

        • Phone book data stored on a cellular phone can be transferred manually.
        Audio Settings

        • Sound quality can be adjusted.

        • Radio setting can be changed:


          • Automatically seek an FM station that regularly broadcasts traffic information and the station broadcasts.

          • An FM station providing good reception is automatically selected if current reception worsens.

          • Switching over to a broadcasting station within the same local program network.
        Vehicle Settings Customizable vehicle settings can be changed.

  2. DIAGNOSIS


    1. For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.