BRAKE CONTROL SYSTEM


  1. CONSTRUCTION


    1. The brake actuator consists of the actuator portion and skid control ECU.

    2. The actuator portion regulates the hydraulic brake pressure to each wheel cylinder.

      A01T0R1C01
      *A Models with Brake Control (ABS with EBD) *B Models with Brake Control (ABS with EBD, Brake Assist, TRC, VSC and Hill-start Assist Control)
      *1 Skid Control ECU *2 Actuator Portion
      *a To Front Wheel Cylinder LH *b To Rear Wheel Cylinder RH
      *c To Rear Wheel Cylinder LH *d To Front Wheel Cylinder RH
      *e From Master Cylinder - -
      A01T0PM Front - -

    3. The brake actuator is constructed with the following hydraulic circuit:

      Figure 1. Models with Brake Control (ABS with EBD)

      A01T11KC01
      *1 Brake Master Cylinder Sub-assembly *2 Brake Actuator Assembly
      *3 Pressure Holding Solenoid Valve *4 Pressure Reduction Solenoid Valve
      *5 Pump *6 Reservoir
      *7 Front Brake Caliper (Left Side) *8 Rear Brake Caliper (Right Side)
      *9 Rear Brake Caliper (Left Side) *10 Front Brake Caliper (Right Side)

      Figure 2. Models with Brake Control (ABS with EBD, Brake Assist, TRC, VSC and Hill-start Assist Control)

      A01T14EC01
      *1 Brake Master Cylinder Sub-assembly *2 Brake Actuator Assembly
      *3 Master Cylinder Pressure Sensor *4 Master Cylinder Cut Solenoid Valve
      *5 Reservoir Cut Solenoid Valve *6 Pressure Holding Solenoid Valve
      *7 Pressure Reduction Solenoid Valve *8 Pump
      *9 Reservoir *10 Front Brake Caliper (Left Side)
      *11 Rear Brake Caliper (Right Side) *12 Rear Brake Caliper (Left Side)
      *13 Front Brake Caliper (Right Side) - -