CVT SYSTEM


  1. CONSTRUCTION


    1. The functions of each transmission revolution sensor are outlined in the table below.

      Transmission Revolution Sensor Type Output Signal Function
      NIN Pick-up Coil Analog Signal Detects the primary pulley speed from the rotation of the timing rotor on the primary pulley.
      NOUT Hall High/Low Digital Signal Detects the secondary pulley speed from the rotation of the reduction driven gear.
      NT Hall High/Low Digital Signal Detects the turbine speed from the rotation of the timing rotor on the forward clutch drum connected to the torque converter turbine runner.

      Figure 1. Transmission Revolution Sensor NIN

      A01KVSPE02
      *1 Magnet
      *2 Coil
      *3 Output Waveform

      Figure 2. Transmission Revolution Sensor NOUT

      A01KVK0E02
      *1 Output Waveform
      *2 Hall IC (Magnet in Hall IC)

      Figure 3. Transmission Revolution Sensor NT

      A01KV6HE01
      *1 Hall IC (Magnet in Hall IC)
      *2 Output Waveform