MULTI-MODE MANUAL TRANSAXLE SYSTEM


  1. CONSTRUCTION


    1. The clutch actuator assembly consists of the clutch motor, reduction gear, operating rod, reservoir tank, clutch stroke sensor, sensor plate and assist spring. This actuator cannot be disassembled.

      A00XRPFC02
      *1 Clutch Stroke Sensor *2 Clutch Actuator Assembly
      *3 Clutch Master Cylinder Assembly *4 Reduction Gear
      *5 Operating Rod *6 Sensor Plate
      *7 Assist Spring *8 Worm Wheel
      *9 Worm Shaft *10 Clutch Motor

  2. OPERATION


    1. The clutch motor operates to pressurize the fluid in the clutch master cylinder assembly, engaging or disengaging the clutch.

    2. Rotational movement of the clutch motor is converted to operating rod movement via the worm shaft, worm wheel and reduction gear, pressurizing the fluid in the clutch master cylinder assembly.

    3. The fluid pressure of the clutch master cylinder assembly is used to operate the CSC, engaging or disengaging the clutch.

    4. When the clutch is being operated, the assist spring provides a force to assist the movement of the operating rod. This reduces the load on the clutch motor at the time the clutch is being released.