STOP AND START


  1. OPERATION


    1. The combination meter assembly receives the idling on/off signals from the engine stop and start ECU.

    2. Pressing the ODO/TRIP DISPLAY switch*1 or DISPLAY switch*2 several times changes the display of the multi-information display to the eco odometer display.


      • Eco Odometer Display: Total idle stop time since the last time the eco odometer was reset. Resetting can be performed by pressing and holding the ODO/TRIP DISPLAY switch*1 or DISPLAY switch*2 (total idle stop time is not erased by turning the ignition switch off).

      *1: Models with segment LCD type multi-information display

      *2: Models with dot LCD type multi-information display

    3. The driver is informed of system operation status and warnings by the stop and start indicator light, stop and start cancel indicator light and buzzer.

      A00XRC6C01
      *A Models with Segment LCD Type Multi-information Display *B Models with Dot LCD Type Multi-information Display
      *1 Stop and Start Indicator Light *2 Stop and Start Cancel Indicator Light
      *3 Multi-information Display *4 ODO/TRIP DISPLAY Switch
      *5 DISPLAY Switch - -
      Stop and Start Indicator Light Operation
      Item Condition Stop and Start Indicator Light Buzzer
      System Operating (Engine is stopped) The vehicle is operating normally. Illuminates Does not sound
      The shift lever is operated without depressing the clutch pedal. Sounds
      The driver's door is opened.
      Stop and Start Cancel Indicator Light Operation
      Condition Stop and Start Cancel Indicator Light
      The vehicle is stopped and system operation conditions are met. OFF
      While the stop and start system is preventing the engine stop control from operating. Illuminates
      When the ecorun cancel switch assembly is ON.
      When any Diagnostic Trouble Code (DTCs) are detected. Blinks*
      When the number of times the starter assembly has been operated exceeds the threshold.

      *: The blinking interval is 0.5 seconds.