EXHAUST SYSTEM


  1. CONSTRUCTION


    1. The exhaust pipe assemblies are made of stainless steel to reduce its weight and improve rust resistance.

    2. Ball joints are used to join No. 2 exhaust manifold converter sub-assembly to the front exhaust pipe assembly, and the front exhaust pipe assembly to the center exhaust pipe assembly.

      Figure 1. Hatchback Models

      B0040CMC01
      *1 Ball Joint *2

      Exhaust Manifold Converter Sub-assembly


      • NSR Catalytic Converter

      • DPF Catalytic Converter
      *3 Front Exhaust Pipe Assembly *4 Gasket

      Figure 2. Wagon Models

      B0040D0C01
      *1 Ball Joint *2

      Exhaust Manifold Converter Sub-assembly


      • NSR Catalytic Converter

      • DPF Catalytic Converter
      *3 Front Exhaust Pipe Assembly *4 Gasket

      Figure 3. Sedan Models

      B0040A5C01
      *1 Ball Joint *2

      Exhaust Manifold Converter Sub-assembly


      • NSR Catalytic Converter

      • DPF Catalytic Converter
      *3 Front Exhaust Pipe Assembly *4 Gasket