FUEL SYSTEM


  1. CONSTRUCTION


    1. A multiplex layered plastic fuel tank assembly is used. This fuel tank assembly consists of 6 layers of 4 types of material.

    2. A fuel drain mark has been provided at the lowest position of the fuel tank assembly. When dismantling (scrapping) the vehicle, drain fuel by drilling a hole at the drain mark.

      A00XR6XC01
      *1 High Density Polyethylene (HDPE) *2 Regrind Material
      *3 Adhesive *4 Ethylene Vinyl Alcohol Copolymer (EVOH)
      *5 Fuel Drain Mark - -
      *a Fuel Tank Assembly Outside *b Fuel Tank Assembly Inside
      *c Fuel Tank Assembly Wall Cross Section *d View from Bottom Side