ENGINE UNIT


  1. CONSTRUCTION


    1. The valve lash adjuster assemblies, which are located at the fulcrum of the No. 1 valve rocker arm sub-assemblies, consist primarily of a plunger, a plunger spring, a check ball, and a check ball spring.

    2. Engine oil supplied by the cylinder head sub-assembly and the built-in spring actuate the valve lash adjuster assembly. The oil pressure and the spring force that act on the plunger push the No. 1 valve rocker arm sub-assembly against the cam, adjusting the valve clearance created during the opening and closing of the valve. As a result, engine noise has been reduced.

      A0121AQC01
      *1 Cam *2 No. 1 Valve Rocker Arm Sub-assembly
      *3 Oil Passage *4 Valve Lash Adjuster Assembly
      *5 Plunger *6 Check Ball
      *7 Check Ball Spring *8 Plunger Spring

      Tech Tips

      Valve clearance adjustment is not necessary because a valve lash adjuster assembly is used.