ENGINE UNIT


  1. CONSTRUCTION


    1. The connecting rod sub-assemblies are made of high-strength steel for weight reduction.

    2. Plastic region tightening bolts are used.

    3. The width of the connecting rod bearings have been optimized in width to reduce friction.

    4. The lining surface of the connecting rod bearings are micro-grooved to provide an optimal amount of oil clearance. As a result, cold-engine cranking performance has been improved and engine vibration has been reduced.

      A00XRU0C03
      *1 Connecting Rod Sub-assembly *2 Plastic Region Tightening Bolt
      *3 Connecting Rod Bearing - -
      *a Micro-grooved - -