ENGINE UNIT


  1. CONSTRUCTION


    1. Except Destination Package for Turkey Sedan Models


      1. The pistons are made of aluminum alloy.

      2. By optimizing the squish area at the top of the piston head, the flow of intake air and fuel is controlled, realizing reduced cooling losses of the area around the combustion chamber.

      3. The combustion chamber bowl has been offset from the center to optimize the flow of the fuel air mixture, suppressing the generation of white smoke while at the same time realizing increased fuel efficiency.

      4. A cooling channel is provided to realize excellent piston cooling performance.

      5. A cast iron ring carrier is used to realize excellent wear resistance.

      6. The piston skirt is coated with resin to reduce friction.

      7. The piston pin has been provided with a Diamond Like Carbon (DLC) coating to reduce friction.

        A01KVAOC01
        *1 Cast Iron Ring Carrier *2 Cooling Channel
        *3 Resin Coating *4 Combustion Chamber
        *a Cross Section *b Boa Center
        *c Combustion Chamber Center *d Flow of Fuel Air Mixture

    2. Destination Package for Turkey Sedan Models


      1. The pistons are made of aluminum alloy.

      2. Combustion chambers are provided on the pistons for direct injection.

      3. A cooling channel is provided to realize excellent piston cooling performance.

      4. A cast iron ring carrier is used to realize excellent wear resistance.

      5. The piston skirt is coated with resin to reduce friction.

      6. Full floating type piston pins are used.

        A01KV8ZC01
        *1 Cast Iron Ring Carrier *2 Cooling Channel
        *3 Resin Coating *4 Combustion Chamber