ENGINE UNIT


  1. CONSTRUCTION


    1. The cylinder head sub-assembly is made of aluminum alloy.

    2. The intake manifold is integrated into the cylinder head sub-assembly to realize compact design.

    3. The injector is located near the center of the combustion chamber to promote the mixture of fuel and air.

    4. A water jacket consists of a 2-stage construction to realize excellent cooling performance.

      A00XRMZC01
      *1 Intake Manifold *2 Cylinder Head (Cylinder Head Sub-assembly)
      *3 Glow Plug Hole *4 Injector Hole
      *5 Exhaust Value *6 Intake Valve
      *a Water Jacket *b Cylinder Head Cross Section
      *c View From the Bottom - -