ENGINE UNIT


  1. CONSTRUCTION


    1. The cylinder head sub-assembly is made of aluminum alloy.

    2. The injector is located in the center of the combustion chamber in order to improve engine performance and achieve cleaner emissions.

    3. A glow plug is placed between the intake ports of each cylinder to ensure startability.

    4. A passage for the Exhaust Gas Recirculation (EGR) is provided in the cylinder head sub-assembly.By cooling the exhaust gas, a large amount of exhaust gas is able to recirculate.

    5. A water jacket is provided for the intake and exhaust ports respectively to achieve excellent cooling performance.

      A00XRPVC02
      *1 Glow Plug *2 Injector
      *3 Intake Port *4 Exhaust Port
      *5 Water Jacket - -
      *a Exhaust *b Intake

    6. A hole for installing the exhaust fuel addition injector is located on the No. 4 exhaust port of the cylinder head sub-assembly.

      A00XRS6C01
      *1 Exhaust Fuel Addition Injector Installation Hole - -
      *a Front *b A
      *c View from A - -