ECD SYSTEM


  1. CONSTRUCTION


    1. A non-contact type throttle position sensor, which uses a Hall IC, is mounted on the diesel throttle body assembly.

    2. The Hall IC is surrounded by a magnetic yoke. The Hall IC converts the changes that occur in the magnetic flux into electrical signals, and outputs them in the form of throttle valve position signals to the ECM.

      A01KVIFC01
      *1 Diesel Throttle Body Assembly *2 Diesel Throttle Valve
      *3 Throttle Control Motor - -
      *a Throttle Position Sensor Portion - -
      A01KV4F Intake Air - -