ENGINE UNIT


  1. CONSTRUCTION


    1. Oil passages are provided in the camshafts in order to supply engine oil to the Dual VVT-i system.

    2. A VVT-i controller (camshaft timing gear assembly or camshaft timing exhaust gear assembly) is installed on the front of each camshaft to vary the timing of the intake and exhaust valves.

    3. A timing rotor for the cam position sensor (No. 1 crank position sensor) is provided on the back of both the intake camshaft (camshaft) and exhaust camshaft (No. 2 camshaft).

      A00XRPPC02
      *1 Intake Camshaft (Camshaft) *2 Intake VVT-i Controller (Camshaft Timing Gear Assembly)
      *3 Exhaust VVT-i Controller (Camshaft Timing Exhaust Gear Assembly) *4 Exhaust Camshaft (No. 2 Camshaft)
      *5 Timing Rotor *6 Oil Passage