ENGINE UNIT


  1. CONSTRUCTION


    1. The connecting rod sub-assemblies are made of high-strength steel for weight reduction.

    2. Plastic region tightening bolts are used to achieve a light weight.

    3. The width of the connecting rod bearings has been optimized to reduce friction.

    4. The lining surface of the connecting rod bearing is micro-grooved to provide an optimal oil clearance. As a result, cold-engine cranking performance has been improved and engine vibration has been reduced.

      A00XROFC01
      *1 Plastic Region Tightening Bolt *2 Connecting Rod Sub-assembly
      *3 Connecting Rod Bearing - -
      *a Micro-grooved - -