SFI SYSTEM


  1. CONSTRUCTION


    1. The non-contact type accelerator pedal sensor assembly uses a Hall IC.

    2. The magnetic yoke that is mounted at the accelerator pedal arm rotates around the Hall IC in accordance with the amount of effort that is applied to the accelerator pedal. The Hall IC converts the changes in the magnetic flux that occur at that time into electrical signals, and outputs them as accelerator pedal effort to the ECM.

    3. This accelerator pedal sensor assembly includes Hall IC and circuits for the main and sub signals. It converts the accelerator pedal depressed angles into electric signals with two differing characteristics and outputs them to the ECM.

      A0121CAE01