ECD SYSTEM


  1. CONSTRUCTION


    1. Models without Stop and Start System


      1. The pick-up coil type cam position sensor is used to detect the camshaft position. The sensor generates 1 signal in every 2 revolutions of the crankshaft by using the timing trigger (rib) of the camshaft.

        B0040BQE06
        *1 Cam Position Sensor
        *2 Rib

    2. Models with Stop and Start System


      1. A Magneto-Resistance Element (MRE) type cam position sensor is used. To detect each cam position, a timing rotor that is part of the cam is used to generate 6 (3 high output, 3 low output) pulses for every 2 revolutions of the crankshaft.

        A01KVHXE03
        *1 Timing Sprocket
        *2 Cam Position Sensor
        *3 G Signal