FEATURES


  1. OUTLINE


    1. Entry and Start System


      1. The entry and start system mainly consists of the wireless door lock control function, engine immobiliser function, start function and entry function.

      2. The start function allows the power source mode to be switched between off, on (ACC), and on (IG). The power source can be switched by pushing the engine switch while the key is being carried by the driver. In addition, when the key is carried by the driver, the driver can start the engine by pushing the engine switch with the brake pedal*1 or clutch pedal*2 depressed.


        • *1: Models with automatic transmission

        • *2: Models with manual transmission

      3. For the entry function, the following functions can be operated when the driver is carrying the key:


        • The doors unlock if the outside door handle is gripped or by pressing the back door lock switch (Entry Unlock Function).

        • All doors are locked by touching the lock sensor of the front outside door handle or by pressing the back door lock switch (Entry Lock Function).

    2. Combination Meter Assembly


      1. An Optitron display type combination meter assembly, analog type combination meter assembly with dot display type multi-information display or an analog type combination meter assembly with segment display type multi-information display is used.

      2. The Optitron display type combination meter assembly achieves excellent visibility through the use of smoke acrylic in the protective panel, and bright Light Emitting Diodes (LEDs) that have high contrast to illuminate the indicator and the dial.

        B001BLSE03
        Text in Illustration
        *A Optitron Display Type Combination Meter Assembly - -
        B001BQZE02
        Text in Illustration
        *A Analogue Type Combination Meter Assembly with Segment Display Type Multi-information Display *B Models with Automatic Transmission
        *C Models with Manual Transmission - -
        B001BXHE02
        Text in Illustration
        *A Analogue Type Combination Meter Assembly with Dot Display Type Multi-information Display - -

    3. TOYOTA Parking Assist-sensor System


      1. The TOYOTA parking assist-sensor system uses ultrasonic sensors and is equipped with a beeping alarm. It can detect obstacles at the rear of the vehicle, and provide information to the driver regarding the distance.

      2. The TOYOTA parking assist-sensor system informs the driver of the approximate distance between the sensors and the obstacles as well as their positions by displaying them on the multi-information display in the combination meter assembly*1 or on the multi-display*2 or the clearance warning indicator assembly*3 and by sounding a buzzer.


        • *1: Models with Optitron display type combination meter assembly

        • *2: Models without clearance warning indicator assembly

        • *3: Models with clearance warning indicator assembly

    4. Parking Assist Monitor System


      1. The rear parking assist monitor system consists of the rear monitor and parking guide lines to assist the driver in parking the vehicle.

      2. The rear parking assist monitor system has a rear television camera assembly mounted on the back door*1 or the back door spare tire carrier*2 to display a view of the area behind the vehicle on the multi display assembly.

      3. This system consists of the rear television camera assembly, parking assist ECU, and multi display.


        • *1: Models without back door spare tire carrier

        • *2: Models with back door spare tire carrier

        B001BXKE05
        Text in Illustration
        *A Models with Parallel Parking Assist Mode - -
        *a Perpendicular Parking *b Parallel Parking Assist
        *c Parking Mode Switch Screen Button *d The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.

    5. Blind Spot Monitor System


      1. Models for Europe, the blind spot monitor system performs 2 functions using the same blind spot monitor sensors: blind spot monitor function and rear crossing traffic alert (RCTA) function*.


        • *: Models with RCTA function

      2. Except models for Europe, the blind spot monitor system performs 2 functions using the same blind spot monitor sensors: blind spot monitor function and rear cross traffic alert (RCTA) function*.


        • *: Models with RCTA function

    6. Monitor System


      1. To assist the driver in parking the vehicle by monitoring the area behind it, the rear monitor system has a rear television camera assembly mounted on the back door*1 or back door spare tire carrier*2.

      2. This system consists of the rear television camera assembly, multi-display*3.


        • *1: Models without back door spare tire carrier

        • *2: Models with back door spare tire carrier

        • *3: Models with navigation system or Display Audio System

    7. Multi-terrain Monitor System


      1. In the multi-terrain select, the multi-terrain monitor system uses television camera assemblies located on the front grille, outer rear view mirror assembly and back door*1 or back door spare tire carrier*2 and displays images on the multi display assembly*3 to allow the driver to see blind spots around the vehicle, thus assisting the driver's vision.

      2. A switch to turn the multi-terrain monitor system on and off and switch the screen display is located on the steering wheel.

      3. The system consists of the television camera assemblies, multi-display*3, steering pad switch and parking assist ECU.


        • *1: Models without back door spare tire carrier

        • *2: Models with back door spare tire carrier

        • *3: Models with navigation system or Display Audio System

        B001BQVE03
        Text in Illustration
        *A Models with Manual Transmission *B Models with Automatic Transmission
        *C Models with 1KD-FTV Engine and Automatic Transmission *D Models without Back Door Spare Tire Carrier
        *E Models with Back Door Spare Tire Carrier - -
        *1 Side Television Camera Assembly RH *2 Front Television Camera Assembly
        *3 Back-up Light Switch Assembly *4 Park/Neutral Position Switch Assembly
        *5 TCM *6 Side Television Camera Assembly LH
        *7 Skid Control ECU *8 Rear Television Camera Assembly
        *a Front View Mode *b Rear View Mode
        *c Side Front Simultaneous View Mode *d Side Rear Simultaneous View Mode

    8. Rear Seat Entertainment System (RSES)


      1. The RSES displays images from the Blu-ray player or an auxiliary player on the television display assembly. The RSES also outputs sound via the speakers or headphones.

      2. The RSES television display assembly is provided on roof headlining, thus enabling each rear seat occupant to view the television image while looking straight forward.

      3. A pair of 9.0-inch Wide Video Graphics Array (WVGA) monitor is used for the television system. In addition, Light Emitting Diodes (LEDs) are used to provide mercury-free backlighting. This reduces the burden on the environment and ensures brightness.

      4. Disc and VIDEO buttons are provided separately on the remote controller, thus enhancing usability.

      5. A menu screen exclusive to the RSES is provided, thus enhancing operability of each content selection.

        B001BICE03
        Text in Illustration
        *1 Television Display Assembly *2 Remote Controller

    9. Seat


      1. Seat Variation


        • An 8-way power seat, a 6-way manual seat, a 4-way power seat and a 4-way manual seat are provided for the front seat.

        • A bench type front passenger seat is used on RHD 10-passenger models for Africa and Papua New Guinea as an option.

        • A bench type front passenger seat is used on LHD 10-passenger models for Africa as an option.

        • A 60/40 split tumble seat is provided for the rear No. 1 seat on 3-door models.

        • A 60/40 split double-folding seat is provided for the rear No. 1 seat on 5-passenger models, 5-door models with 10-passenger models.

        • A 60/40 split slide walk-in seat is provided for the rear No. 1 seat on 7-passenger models.

        • A double-flat seat (manual/power) is provided for the rear No. 2 seat on 7-passenger models.

        • Face to face seat is provided for the rear No. 2 seat on 9-passenger models and 10-passenger models.

      2. Front Power Seat


        • A power seat control system is used for the driver seat and front passenger seat.

        • A memory function is used in the power seat control system for the driver seat.

      3. Rear No. 2 Power Seat with Folding Function


        • A power seat control system is used for rear No. 2 seat.

        • The rear No. 2 seat is stowed automatically by the folding function.

      4. Seat Cover

        Genuine leather and 2 types of fabric are provided for the seat cover.

    10. Glass Hatch Opener System


      • The glass hatch is opened by pressing a button on the models without back door spare tire carrier.

      A01UL5E

    11. Exterior Color and Interior Color

      Exterior Interior
      Color No. Color Name Color Name
      218 Attitude Black Mica Black or Flaxen or Red Wood*
      4T3 Bronze Mica Metallic
      6V4 Dark Green Mica
      040 Super White II
      070 White Pearl Crystal Shine
      1F7 Silver Metallic
      1G3 Gray Metallic
      1H2 Dark Steel Mica
      202 Black
      3R3 Red Mica Metallic

      • *: Color package models or specially equipped model.