SEAT ASSEMBLY


  1. CONSTRUCTION


    1. Folding rear seats with a 60:40 split or fixed rear seats are provided.

    2. The rear seat belts are integrated into the outer seats so that the seat belts will not interfere with the seatbacks when the seatbacks are being folded.

    3. In consideration of security, the rear seatbacks can be locked from the luggage compartment using the rear seatback lock levers so that the seatbacks cannot be operated from the cabin.

    4. Seatback levers are designed to be pulled in the same direction as the seat folds in consideration of operability.

    5. Cup holders integrated into the armrest are provided.

    6. Saddle-shaped headrests are provided to ensure visibility of the area behind the vehicle.

      A0111KJC01
      *1 Rear Seat Lock Control Lever Sub-assembly *2 Rear Seatback Lock Sub-assembly RH
      *3 Rear Seat Outer belt Assembly RH (Rear Seat 3 Point Type Belt Assembly Outer RH) *4 Rear Seat Outer belt Assembly LH (Rear Seat 3 Point Type Belt Assembly Outer LH)
      *5 Rear Seat Center Armrest Cup Holder Sub-assembly *6 Rear Seat Headrest Assembly
      *7 Rear Seat Center Headrest Assembly - -
      *a Lock *b Unlock

    7. ISO-FIX bars for securing child seats are behind the seat cushion of the rear seat.

    8. Top tether anchor bars are provided for the rear seats. In addition, covers (child restraint seat tether anchor covers) are provided for the top tether anchor bars (child restraint seat tether anchor bracket) in consideration of appearance.

      A0111LCC01
      *1 Cover (Child Restraint Seat Tether Anchor Cover) *2 Top Tether Anchor Bar (Child Restraint Seat Tether Anchor Bracket)
      *3 ISO-FIX Bar (Child Restraint Seat Anchor Bracket Sub-assembly RH) *4 ISO-FIX Bar (Child Restraint Seat Anchor Bracket Sub-assembly LH)
      *5 Cover (Child Restraint Seat Belt Cap) - -
      *a The center child restraint seat tether anchor bracket is provided on some models. - -