FUEL SYSTEM


  1. CONSTRUCTION


    1. A multi-layer plastic fuel tank assembly is used. The multiplex layered plastic fuel tank assembly consists of six layers of four types of materials, and one of those is a recyclable material to address environmental concerns.

    2. A fuel drain mark has been provided at the lowest position of the fuel tank assembly. When dismantling (scrapping) the vehicle, drain fuel by drilling a hole at the drain mark.

    3. The fuel tank assembly uses a saddle shape to allow the propeller shaft to pass under the center portion of the tank. Also, a jet pump is used to transfer the fuel from the side of the tank without the fuel pump assembly to the side with the fuel pump assembly.

      A0111JSC01
      *1 High Density Polyethylene (HDPE) *2 Regrind Material
      *3 Adhesive *4 Ethylene Vinyl Alcohol Copolymer (EVOH)
      *a View from Bottom Side *b Fuel Tank Outside
      *c Fuel Tank Inside *d Fuel Tank Wall Cross Section
      *e Fuel Drain Mark - -